中国DOS联盟

安装MSCLient提示

please insert the oem driver disk

ＯＥＭ驱动　在ＭＳＣＬＩＥＮＴ　ＤＩＳＫ１盘里没有啊，具体路径是指？



高手啊！～～快来ＳＯＳ！！！！

以上是在装的时候只选TCP/IP，如果只选NETBEUI则不会出现以上问题


但是安装成功后，net start输入用户和密码登陆成功，但是无法用NET VIEW

[RTL8139]
devdir=?:rtsnd.dos
device=rtsnd.dos,@devdir tsnd.dos
这个具体是什么意思？

要什么改？ 我网卡驱动放在MSCLIENT的DISK1软盘里。

MSCLIENT安装在C：\NET下

指定网卡驱动的路径就可以了，那两段文字一般情况下用不着改。

c:\> set path=c:\net
c:\> c:\net\net initialize
pro0008e:invalid decimal digit in protocol.ini file
error 7306 :the driver failed to initialize

c:\>c:\netbind.com
ms-dos lan manager v2.1 netbind
error:7906 unable to open protman$
c:\>c:\net\umb.com
c:\>c:\net\tcptsr.exe
net0109: tcp is not loaded -detected by tcp
unloadable tcp 1.0 not loaded
c:\>c:\net\tinyrfc.exe
net0109:tcp is not loaded - detected by tiny rfc
tiny rfc 1.0 not load
c:\> c:\net\nmtsr.exe
net0109:tcp is not loaded - detected by nmtsr
unloadable nmtsr 1.0 not loaded
c:\>c:\net\emsbfr.exe
c:\>c:\net start
pro0008e:invalid decinal digit in protocol.ini file

Last edited by doslearn on 2007-8-2 at 02:25 PM ]

以上是从DOS启动，MSCLIENT采取是TCP/IP模式

DEVICE=C:\DOS71\ECHO.SYS W/e/l/c/o/m/e /t/o MS-DOS 7.10...
DEVICE=C:\DOS71\ECHO.SYS C/o/p/y/r/i/g/h/t M/i/c/r/o/s/o/f/t C/o/r/p. A/l/l /r/i/g/h/t/s /r/e/s/e/r/v/e/d.
DEVICE=C:\DOS71\HIMEM.SYS
DEVICE=C:\DOS71\EMM386.EXE RAM
DEVICE=C:\NET\NEMM.DOS
DEVIEC=C:\NET\PROTMAN.DOS
DEVICEHIGH=C:\DOS71\SETVER.EXE
REM DEVICEHIGH=C:\DOS71\POWER.EXE
DEVICEHIGH=C:\DOS71\VIDE-CDD.SYS /D:IDE-CD
REM DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1)
COUNTRY=001,437,C:\DOS71\COUNTRY.SYS
SHELL=COMMAND.COM /P /E:640
DOS=HIGH,UMB,AUTO
FCBS=4,0
FILES=30
BUFFERS=20,0
LASTDRIVE=26
STACKS=9,256
SET PATH=C:\DOS71;..;

device=C:\NET\ifshlp.sys

SET PATH=C:\NET
C:\NET\net initialize
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start

[network.setup]
version=0x3110
netcard=RTL8139,1,RTL8139,1
transport=tcpip,TCPIP
lana0=RTL8139,1,tcpip

[TCPIP]
NBSessions=6
DefaultGateway0=192.168.0.1
SubNetMask0=255.255.255.0
IPAddress0=192.168.0.9
DisableDHCP=1
DriverName=TCPIP$
BINDINGS=RTL8139
LANABASE=0

[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

[RTL8139]
DriverName=rtsnd$
Medium=_Auto

下面都被注释掉，因为没安装前就没加进驱动，而是采取手动指定驱动路径安装的
[netcard]
;RTL8139="RTL8139 Fast Ethernet Adapter",000,ndis,ethernet,real,RTL8139,RTL8139_nif

;[RTL8139]
;devdir=a:
;device=rtsnd.dos,@devdir\rtsnd.dos
;ndis2=1:rtsnd.dos


;[RTL8139_nif]
;drivername=rtsnd$
;param=Medium,"Medium type ",text,"_Auto,_10Half,_10Full,_100half,_100Full",_Auto,0x30
;param=NETADDRESS,"Network Address",chars,13,"@000000000000",0x02
;param=ETHERID,"Node Address",chars,13,"@000000000000",0x02
;param=BusNo ,"Adpater's Bus Number",int,"0,255,1",0,0x32
;param=DeviceNo ,"Adpater's Device Number",int,"0,31,1",0,0x32

安装MSCLient提示

please insert the oem driver disk 这个问题已经解决了，提示放OEM盘时候放入MSCLIENT DISK2就可以了