|
sun_lixin
初级用户
积分 172
发帖 15
注册 2003-9-26
状态 离线
|
『第 226 楼』:
使用 LLM 解释/回答一下
好东西就得顶！！
Good stuff deserves to be supported!!
|
|
 2003-9-29 00:00 |
|
|
7973798
初级用户
积分 102
发帖 1
注册 2003-9-30
状态 离线
|
|
|
2003-9-30 00:00 |
|
|
zzdao
初级用户
积分 102
发帖 1
注册 2003-10-7
状态 离线
|
『第 228 楼』:
使用 LLM 解释/回答一下
请问站长，做成usb闪盘启动盘如何进行？直接拷贝启动错误，同时用m3、m4启动时，我的电脑启动不了，最后是死机。我的电脑是联想p4.
Excuse me, webmaster, how to make a USB flash drive bootable? Just copying and booting is incorrect. Also, when using m3 and m4 to boot, my computer can't start and finally freezes. My computer is a Lenovo P4.
|
|
|
2003-10-7 00:00 |
|
|
Eden
初级用户
Eden
积分 121
发帖 5
注册 2003-10-8
状态 离线
|
『第 229 楼』:
使用 LLM 解释/回答一下
我对 MS-DOS 7.10启动盘 有点建议：
其实可以在config.sys里以这形式使用 "device?"
DEVICE?=EMM386.EXE
这样每次启动都会提示用户是否加载emm386.exe
I have some suggestions for the MS-DOS 7.10 boot disk:
Actually, you can use "device?" in the form like this in config.sys:
DEVICE?=EMM386.EXE
This way, every time you boot, it will prompt the user whether to load emm386.exe
|
http://www.vbeden.com |
|
|
2003-10-8 00:00 |
|
|
gly2003
初级用户
积分 112
发帖 6
注册 2003-10-8
状态 离线
|
『第 230 楼』:
使用 LLM 解释/回答一下
你制作的msdos7.10启动盘,能启动 E 盘上Windows98,这一点不简单!
我 C 盘上是Windows me,它与Windows 98 不兼容,98的启动程序不能在C盘上,这个优点很好!
但是缺点也不小,我把msdos7.10装在 U 盘上,启动时,只有第一项能启动,2,3,4 ,项不行.diskgen
是一个维护硬盘的好工具,不能运行diskgen.exe,运行它容易死机,再一个能不能启动安装windows?
The MS-DOS 7.10 boot disk you made can boot Windows 98 on drive E, which is not easy!
My C drive has Windows Me, which is incompatible with Windows 98, and the boot program of 98 can't be on the C drive. This advantage is very good!
But there are also many drawbacks. I installed MS-DOS 7.10 on the USB flash drive. When booting, only the first item can be started, and items 2, 3, 4 don't work. DiskGen is a good tool for maintaining the hard drive. Running diskgen.exe can easily cause a system crash. Also, can it boot to install Windows?
|
|
|
2003-10-8 00:00 |
|
|
Wengier
系统支持
“新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 231 楼』:
使用 LLM 解释/回答一下
以下是引用Eden在2003-10-8 11:42:25的发言：
我对 MS-DOS 7.10启动盘 有点建议：
其实可以在config.sys里以这形式使用 "device?"
DEVICE?=EMM386.EXE
这样每次启动都会提示用户是否加载emm386.exe
这个我以前就考虑过，不过后来放弃了，原因是不太直观。不过我会想一些更好的办法的。
The following is a quote from Eden on 2003-10-8 11:42:25:
I have some suggestions for the MS-DOS 7.10 boot disk:
Actually, you can use the form "device?" in config.sys
DEVICE?=EMM386.EXE
This way, every time you start up, the user will be prompted whether to load emm386.exe
I thought about this before, but then I gave it up because it's not very intuitive. But I'll think of some better ways.
|
Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站，里面有各类DOS软件和资料，地址：
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com （最近比较忙，有事请联系DOSroot和雨露，谢谢！）
 |
|
|
2003-10-8 00:00 |
|
|
moses
初级用户
积分 102
发帖 1
注册 2003-10-10
状态 离线
|
『第 232 楼』:
使用 LLM 解释/回答一下
你好，我下载了你的dos7.10启动盘，具体怎么用呢？是不是直接考到软盘上，在插入软驱里重起就可以呢。我实新手，见笑了
Hello, I downloaded your DOS 7.10 bootable disk. How exactly do I use it? Is it just directly copied to a floppy disk, then inserted into the floppy drive and restarted? I'm a newbie, please excuse me.
|
|
|
2003-10-10 00:00 |
|
|
gao7240
初级用户
积分 155
发帖 24
注册 2003-10-1
状态 离线
|
『第 233 楼』:
使用 LLM 解释/回答一下
现在的WINDOWS 系统老是出问题，用DOS 的机会大大的提高了。
Nowadays, the Windows system often has problems, and the opportunity to use DOS is greatly increased.
|
|
|
2003-10-10 00:00 |
|
|
leizp
初级用户
积分 102
发帖 1
注册 2003-10-10
状态 离线
|
『第 234 楼』:
使用 LLM 解释/回答一下
说点题外话——关于防病毒软件孰好孰劣，很难说。
我有个亲身体会：有一个木马，NAV （企业8.1黄金版，最新升级）死活发现不了，有两个在压缩文件里的它能发现而杀不掉；而熊猫卫士铂金版（最新的7.05.03）能发现并能直接在压缩包里面杀掉；Sophors 3.73和AVP 3.5 Swiss版能发现但不能在包里杀掉。我现在平时用AVP 3.5（小巧极了，只占3M多内存），Sophors更小巧可惜不能在线升级。以前一直用PC-Cillin，升级真叫及时，几乎两天一更新，可惜现在不好升级了：（。
Let's talk about an off-topic - it's hard to say which antivirus software is better or worse.
I have a personal experience: There is one Trojan horse that NAV (Enterprise 8.1 Gold Edition, the latest update) simply can't detect, and there are two that it can detect but can't kill when they are in compressed files; while Panda Antivirus Platinum Edition (the latest 7.05.03) can detect and can directly kill within the compressed package; Sophors 3.73 and AVP 3.5 Swiss Edition can detect but can't kill within the package. I usually use AVP 3.5 now (it's extremely compact, taking up only more than 3MB of memory), and Sophors is more compact but unfortunately can't be updated online. I used to use PC - Cillin all the time, and the updates were really timely, almost updated every two days, but unfortunately it's not easy to update now : (
|
|
|
2003-10-10 00:00 |
|
|
fsdanny
初级用户
积分 106
发帖 2
注册 2003-10-6
状态 离线
|
『第 235 楼』:
使用 LLM 解释/回答一下
启动菜单不太直观。。。
The startup menu is not very intuitive...
|
|
|
2003-10-11 00:00 |
|
|
菜鸟级人物
初级用户
积分 133
发帖 12
注册 2003-10-20
状态 离线
|
『第 236 楼』:
使用 LLM 解释/回答一下
我用的本本是全外置USB的，因为2000内核坏了，所以要用DOS引导，想在DOS下用USB光驱重装2000，但是选第三项后出现找到LG CD-ROM，可是然后就是：
THE following file is missing or corrupted:ASPIUHCI.SYS
There is an error in your CONFIG.SYS file on line 50
THE following file is missing or corrupted<img src="images/smilies/face-smile-big.png" align="absmiddle" border="0">i1000DD.SYS
There is an error in your CONFIG.SYS file on line 51
THE following file is missing or corrupted:USBCD.SYS
There is an error in your CONFIG.SYS file on line 52
等等
最后停在
A>这里
然后输入任何命令都没有用了
请问斑竹，这个怎么办啊~~~~~`
The notebook I'm using is fully externally powered via USB. Since the 2000 kernel is broken, I need to boot with DOS and want to reinstall 2000 using a USB CD-ROM under DOS. But after selecting the third option, it finds the LG CD-ROM, but then it's:
THE following file is missing or corrupted:ASPIUHCI.SYS
There is an error in your CONFIG.SYS file on line 50
THE following file is missing or corrupted:Di1000DD.SYS
There is an error in your CONFIG.SYS file on line 51
THE following file is missing or corrupted:USBCD.SYS
There is an error in your CONFIG.SYS file on line 52
and so on
Finally, it stops at
A> here
Then entering any command doesn't work.
Excuse me, moderator, how should I handle this?
|
|
|
2003-10-20 00:00 |
|
|
nmgtlwh
初级用户
积分 120
发帖 12
注册 2003-10-21
状态 离线
|
『第 237 楼』:
使用 LLM 解释/回答一下
感谢您开发了MSDOS7.10启动盘 。有一请教问题：用软盘启动后（菜单3/4启动项都试验过），只要插入USB闪盘，出现 " DeteCted USB Storage Device "提示后就死机（启动前插入也是同样），我用的是
的意见，毕竟软盘的空间有限。当然这个个人可以搞定。
Thanks for you developing the MSDOS7.10 bootable floppy disk. There is one question to ask: After booting with the floppy disk (both menu items 3/4 have been tested), as soon as I insert a USB flash drive, a "DeteCted USB Storage Device" prompt appears and then the computer freezes (the same happens if inserted before booting). I am using a Patriot - Email - type 64M flash drive. I don't know the reason. Please give me some advice.
In addition, I agree with the opinion that . After all, the space of the floppy disk is limited. Of course, this can be done by individuals.
|
|
|
2003-10-21 00:00 |
|
|
nmgtlwh
初级用户
积分 120
发帖 12
注册 2003-10-21
状态 离线
|
『第 238 楼』:
使用 LLM 解释/回答一下
经过多次试验，USB 爱国者迷你王(64M邮箱型) DOS 驱动程序不能加载 DUSE.EXE。如果加载肯定死机。所以要将MSDOS7.10 中的配置文件更改。即在配置文件(config.sys)删除或注释掉 DEVICE=DUSE.EXE，具体操作如下：
1.用记事本打开 ConFig.SYS,分别找到、程序段，在
“DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD”命令行前加上 REM
如：REM DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD ,或者干脆将此命令行删除。
注意，、二程序段都要这样处理。
2.另外，如果每次启动时都选择 4.Boot with UMBPCI, NTFS and SCSI/USB drives support(if any),则可以将 程序段的最后一行 MENUDEFAULT=M1,15 改为：MENUDEFAULT=M4,15 或 MENUDEFAULT=M4,0
3.如果每次均是从软盘启动(即不从硬盘和光盘启动)，还可以将启动盘 ROOT 文件夹中的 MENU.LST 文件用记事本打开，将第一行 timeout 10 修改为 timeout 0
特别感谢 Wengier 提供那么多 DOS 驱动程序。
内蒙古通辽市 王海 QQ 53153269
After multiple tests, the USB Patriot Mini King (64M Email Type) DOS driver cannot load DUSE.EXE. If loaded, it will definitely crash. So the configuration file in MSDOS7.10 needs to be changed. That is, delete or comment out DEVICE=DUSE.EXE in the configuration file (config.sys). The specific operations are as follows:
1. Open ConFig.SYS with Notepad, respectively find the and program segments, and add REM in front of the command line "DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD". For example: REM DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD, or simply delete this command line.
Note that both the and program segments need to be processed in this way.
2. In addition, if you choose 4.Boot with UMBPCI, NTFS and SCSI/USB drives support(if any) every time you start, you can change the last line MENUDEFAULT=M1,15 in the program segment to: MENUDEFAULT=M4,15 or MENUDEFAULT=M4,0
3. If you always boot from a floppy disk (that is, not from the hard disk or CD-ROM), you can also open the MENU.LST file in the ROOT folder of the boot disk with Notepad, and change the first line timeout 10 to timeout 0
Special thanks to Wengier for providing so many DOS drivers.
Tongliao City, Inner Mongolia, Wang Hai QQ 53153269
|
|
|
2003-10-22 00:00 |
|
|
150140008
初级用户
积分 113
发帖 5
注册 2003-10-23
状态 离线
|
|
|
2003-10-23 00:00 |
|
|
wewesun
初级用户
积分 106
发帖 3
注册 2003-10-23
状态 离线
|
『第 240 楼』:
使用 LLM 解释/回答一下
楼主，我下载回去后解压完有1。46mb，一张软盘放不下呀！！
怎么办？！
楼主, I downloaded it and after extracting it's 1.46mb. It won't fit on a single floppy disk! What should I do?!
|
|
|
2003-10-23 00:00 |
|
