以下是引用gdaguo在2004-2-23 下午 04:39:45的发言：
DOS启动盘中的必备驱动及TSR程序是否一定要在config文件中加载?可以在autoexec.bat中加载吗?
我比较喜欢用ctload来加载驱动，这样就可以在启动后动态加载，而不毕非得在config.sys,如下面的config.sys和autoexec.bat
config.sys
menuitem=CLEAN, Clean DOS for BIOS update, no memory manager loaded...
menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menuitem=NTFSDOS, Start with NTFS File System Driver,NTFSDOS V3.02R+(ReadOnly)
menuitem=USB, Start with IDE/USB/FireWire driver,support FAT32/NTFS,NERODISK
menuitem=USBHD,Start with USB mass storage driver, USBASPI.SYS&DI1000DD.SYS
menuitem=USBCD,Start with USB CDROM driver, USBASPI.SYS&USBCD.SYS
menuitem=1394HD,Start with 1394 mass storage driver,Sbp2aspi.sys&Nj32disk.sys
menuitem=1394CD,Start with 1394 CDROM driver,Sbp2aspi.sys&cdsdmini.sys
menudefault=CLEAN,30
menucolor=7,0
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
device=himem.sys /testmem<img src="images/smilies/face-surprise.png" align="absmiddle" border="0">ff
dos=high,umb
files=10
buffers=10
stacks=9,256
lastdrive=z
autoexec.bat
@ECHO OFF
REM JETSUN,2004/0/28
set prompt=$p$g
IF "%config%"=="CLEAN" GOTO CLEAN
IF "%config%"=="CD" GOTO CD
IF "%config%"=="NOCD" GOTO NOCD
IF "%config%"=="USB" GOTO USB
IF "%config%"=="NTFSDOS" GOTO NTFSDOS
IF "%config%"=="USBCD" GOTO USBCD
IF "%config%"=="USBHD" GOTO USBHD
IF "%config%"=="1394CD" GOTO 1394CD
IF "%config%"=="1394HD" GOTO 1394HD
goto quit
:CD
\toddy615\TODDY.COM
\MOUSE
CD CDROM
CALL RUN.BAT
CD \
GOTO QUIT
:NOCD
\toddy615\TODDY.COM
\MOUSE
GOTO QUIT
:USB
\MOUSE
\toddy615\TODDY.COM
CD \USB\DRDOSUSB
CALL USB.BAT
GOTO QUIT
:NTFSDOS
\MOUSE
\toddy615\TODDY.COM
CD \NTFSDOS
NTFSDOS.EXE
GOTO QUIT
:USBCD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL USBCD.BAT
GOTO QUIT
:USBHD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL USBHD.BAT
GOTO QUIT
:1394CD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL 1394CD.BAT
GOTO QUIT
:1394HD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL 1394HD.BAT
GOTO QUIT
:CLEAN
REM ´¿DOS»·¾³,ÓÃÓÚÉý¼¶BIOS
echo Clean Bootable DISK
if not exist EMMQXXX0 goto _noems
echo CLEAN: Expanded memory manager (EMS) is loaded!
goto _noclean
:_noems
if not exist XMSXXXX0 goto _noxms
echo CLEAN: Extended memory manager (XMS) is loaded!
goto _noclean
:_noxms
echo CLEAN: Your system looks clean, no memory manager loaded...
if not exist autorun.bat goto QUIT
echo CLEAN: Running autorun.bat
goto QUIT
:_noclean
echo CLEAN: Your system is *not* clean booted!
GOTO QUIT
:
:QUIT
The following is a quote from gdaguo's post on February 23, 2004, 04:39:45 PM:
Do the essential drivers and TSR programs in the DOS boot disk have to be loaded in the config file? Can they be loaded in autoexec.bat?
I prefer to use ctload to load drivers, so that they can be loaded dynamically after booting, without having to be in config.sys. As in the following config.sys and autoexec.bat
config.sys
menuitem=CLEAN, Clean DOS for BIOS update, no memory manager loaded...
menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menuitem=NTFSDOS, Start with NTFS File System Driver,NTFSDOS V3.02R+(ReadOnly)
menuitem=USB, Start with IDE/USB/FireWire driver,support FAT32/NTFS,NERODISK
menuitem=USBHD,Start with USB mass storage driver, USBASPI.SYS&DI1000DD.SYS
menuitem=USBCD,Start with USB CDROM driver, USBASPI.SYS&USBCD.SYS
menuitem=1394HD,Start with 1394 mass storage driver,Sbp2aspi.sys&Nj32disk.sys
menuitem=1394CD,Start with 1394 CDROM driver,Sbp2aspi.sys&cdsdmini.sys
menudefault=CLEAN,30
menucolor=7,0
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
device=himem.sys /testmem:off
dos=high,umb
files=10
buffers=10
stacks=9,256
lastdrive=z
autoexec.bat
@ECHO OFF
REM JETSUN,2004/0/28
set prompt=$p$g
IF "%config%"=="CLEAN" GOTO CLEAN
IF "%config%"=="CD" GOTO CD
IF "%config%"=="NOCD" GOTO NOCD
IF "%config%"=="USB" GOTO USB
IF "%config%"=="NTFSDOS" GOTO NTFSDOS
IF "%config%"=="USBCD" GOTO USBCD
IF "%config%"=="USBHD" GOTO USBHD
IF "%config%"=="1394CD" GOTO 1394CD
IF "%config%"=="1394HD" GOTO 1394HD
goto quit
:CD
\toddy615\TODDY.COM
\MOUSE
CD CDROM
CALL RUN.BAT
CD \
GOTO QUIT
:NOCD
\toddy615\TODDY.COM
\MOUSE
GOTO QUIT
:USB
\MOUSE
\toddy615\TODDY.COM
CD \USB\DRDOSUSB
CALL USB.BAT
GOTO QUIT
:NTFSDOS
\MOUSE
\toddy615\TODDY.COM
CD \NTFSDOS
NTFSDOS.EXE
GOTO QUIT
:USBCD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL USBCD.BAT
GOTO QUIT
:USBHD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL USBHD.BAT
GOTO QUIT
:1394CD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL 1394CD.BAT
GOTO QUIT
:1394HD
\MOUSE
\toddy615\TODDY.COM
CD \USB
CALL 1394HD.BAT
GOTO QUIT
:CLEAN
REM ¿DOS»·¾³, ÓóÃBIOS
echo Clean Bootable DISK
if not exist EMMQXXX0 goto _noems
echo CLEAN: Expanded memory manager (EMS) is loaded!
goto _noclean
:_noems
if not exist XMSXXXX0 goto _noxms
echo CLEAN: Extended memory manager (XMS) is loaded!
goto _noclean
:_noxms
echo CLEAN: Your system looks clean, no memory manager loaded...
if not exist autorun.bat goto QUIT
echo CLEAN: Running autorun.bat
goto QUIT
:_noclean
echo CLEAN: Your system is *not* clean booted!
GOTO QUIT
:
:QUIT
