中国DOS联盟

Originally posted by llm at 2006-1-24 12:25 PM:
No problem, please see the instruction file

What's no problem? Is Disk2-9 no problem? Or is there no problem with writing the image file to the floppy disk? I tried, there is no problem writing to the floppy disk, but there is a problem with Disk2-9 during installation. Have you tried installation and it's okay?

I have reinstalled it several times repeatedly.
It is irresponsible to provide downloads without testing oneself.
I posted the thread after testing that there were no issues.

I installed it directly using VMware virtual machine. The first ima file is a 1.44 floppy disk image and can be installed normally. The subsequent ones are all 1.840 imas. After installing the first disk, the subsequent ones cannot be installed, and it prompts that the format is incorrect. Can you teach me, you clever bird?

Strange, is it because of different VMware versions? I have no problem with 5.5.1-19175. You can give it a try.

Today, I downloaded VMware Workstation 5.51-19175 and installed PCDOS, which works. PCDOS is really good, but the second installation disk is missing quite a few files. I recorded it, there are thirteen missing files. When you installed it, was the second disk normal?

CCF has someone made a CD version, and the installation is successful without problems.

CCFailing to open registration...

Do it yourself. The CD production process:

Manual production method:
Create a folder CDROM, enter CDROM and then create a folder DOS7V;
Extract the first disk image file to "DOS7V", and delete autoexec.bat and config.sys;
Extract the second disk image file, add the extension ".1" to all files without an extension, and then copy them to DOS7V;
……Three…………………………………………………………………………….2……………………… ;
……Four…………………………………………………………………………….3……………………… ;
……Five…………………………………………………………………………….4……………………… ;
……Six…………………………………………………………………………….5……………………… ;
……Seven…………………………………………………………………………….6……………………… ;
……Eight…………………………………………………………………………….7……………………… ;
……Nine…………………………………………………………………………….8……………………… ;

Now start making the boot part:
Open the first disk image, delete setup*.*, unpack2.exe, xdf*.*;
Modify Autoexec.bat and config.sys, referring to the Win98 boot disk part;
Add the following files from the Win98 boot disk to the image:
oakcdrom.sys
btdosm.sys
flashpt.sys
btcdrom.sys
aspi2dos.sys
aspi8dos.sys
aspi4dos.sys
aspi8u2.sys
aspicd.sys
Modify the Win98 boot disk findcd.exe and then add it to the image,
Change finding \WIN98\SETUP.EXE to: \DOS7V\SETUP.COM ;
Save the image, and use cdimage to make an iso.

autoexec.bat

/**************************/

@ECHO OFF
ibmcpi
font
disp
set EXPAND=YES
SET DIRCMD=/O:N
cls
set temp=c:\
set tmp=c:\
path=a:\

IF "%config%"=="NOCD" GOTO QUIT
LH MSCDEX.EXE /D:oemcd001 /L:D

echo.
IF "%config%"=="SETUP_CD" goto AUTOSETUP
GOTO QUIT

:AUTOSETUP
set CDROM=FOO23
FINDCD.EXE
if "%CDROM%"=="FOO23" goto NOCDROM
CHOICE /C:YN /TY,10 "Install PC DOS P7 Chinese version ?"
if errorlevel 2 goto QUIT
path=a:\;%CDROM%\
%CDROM%
cd \DOS7V
echo.
SETUP.COM
goto QUIT

:NOCDROM
echo.
echo No PC DOS P7 installation files found.
echo.

:QUIT

config.sys
/**********************************************/


menuitem=SETUP_CD, Start PC DOS P7 Setup from CD-ROM.
menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menudefault=SETUP_CD,30
menucolor=7,0


device=himem.sys
device=oakcdrom.sys /D:oemcd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:oemcd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:oemcd001


device=himem.sys
device=oakcdrom.sys /D:oemcd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:oemcd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:oemcd001


device=himem.sys


files=60
buffers=20
dos=high,umb
stacks=9,256
lastdrive=z
country=086,437,a:\country.sys

Hey, I see clearly, this person's production method is exactly the same as the CD version I got. Wait for me to test, the CD here can't boot.

Hey, it's really okay. Just add the boot disk of pcdos7c to the iso, original flavor! The only thing I didn't figure out is: find \WIN98\SETUP.EXE and change it to: \DOS7V\SETUP.COM; In my opinion, it's unnecessary because the setup.com of the floppy version and the CD version are the same, no need to borrow msdos files

It turns out it's still 16-bit.

I made a CD image file and installed it successfully on Connectix Virtual PC.
It was still 16-bit originally.
Only the FAT16 file system is recognized.
Not much better than the Chinese version of MS-DOS 6.22.

Everyone. If you find that the 1840KB floppy disk image cannot be used on the virtual machine, there is no need to make it into a CD. Just set the floppy drive to 2.88M in the virtual machine's BIOS.