|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『楼 主』:
为什么lynx不能用
使用 LLM 解释/回答一下
我在启用lynx的时候说configruration file /dev/dnv/DJDIR/lib/lynx.cfy isnot available
是怎么回事
还有我先后 运行了 lsl , trspkt 0x60
然后运行 ipxodi 的时候 怎么说 IPXDOI-210-19: A Network adapter driver must be loaded before IPXODI.COM can be loaded
还有就是在运行一些网络工具(ping ,telnet 等)的时候说:
config file not found
configuring though BOOTTP/DHCP
是怎么一回事
When I get the message "configuration file /dev/dnv/DJDIR/lib/lynx.cfy is not available" when enabling lynx.
Also, after I ran lsl and trspkt 0x60 successively, when running ipxodi, it says "IPXDOI-210-19: A Network adapter driver must be loaded before IPXODI.COM can be loaded".
And when running some network tools (ping, telnet, etc.), it says "config file not found; configuring though BOOTTP/DHCP". What's the matter?
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
IPXODI需要的是网卡的ODI驱动程序,而不是那个Packet驱动程序。
LYNX若出现那条信息的话,在启动LYNX前设置“set LYNX_CFG=lynx.cfg”即可。
IPXODI requires the ODI driver of the network card, not that Packet driver.
If LYNX encounters that message, set "set LYNX_CFG=lynx.cfg" before starting LYNX.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
你上次说的那个地方哪个是IPXODI需要的网卡ODI驱动程序
Which one of the places you mentioned last time is the ODI driver for the network card required by IPXODI?
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
这个是ODI驱动程序:
http://www.terralogic.co.uk/drivers/rt686/driver/LAN/RTL8139/NWCLIENT/DOS/RTSODI.COM
而Lynx则需要Packet驱动程序。
This is the ODI driver:
http://www.terralogic.co.uk/drivers/rt686/driver/LAN/RTL8139/NWCLIENT/DOS/RTSODI.COM
And Lynx requires the Packet driver.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
还是不能用 lynx啊
NO nameserver defined!
NO nameserver defined!
"sin-mask" is 0.0.0.0 !
can't set local ip-address
还有 不能同时加载 lsl rtsodi ipxodi 和 ipxodi 的吗?
The list of servers for this workgroup is not currentiy availabe 是什么意思
Still can't use lynx
NO nameserver defined!
NO nameserver defined!
"sin-mask" is 0.0.0.0 !
can't set local ip-address
Also, can't load lsl rtsodi ipxodi and ipxodi at the same time?
What does "The list of servers for this workgroup is not currently available" mean
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
是说IP地址等没有设置.可在DOS文章中的那篇文章中下载经设置的LYNX.CFG文件,或手工在LYNX.CFG中进行设置也可以.那句英文是说当前无法显示出服务器的列表.
It means that the IP address and other settings are not configured. You can download the configured LYNX.CFG file from the article in the DOS section, or you can manually configure it in LYNX.CFG. The English sentence means that the server list cannot be displayed currently.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
为什么会出现这句话 (The list of servers for this workgroup is not currentiy availabe )
我是先加载了 lsl trsodi ipxodi 之后加载了 rtspkt 就这样了
然后都这样了
Why does the sentence "The list of servers for this workgroup is not currently available" appear? I first loaded lsl trsodi ipxodi, then loaded rtspkt, and then it became like this. And then it was all like this.
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
Packet驱动程序、ODI驱动程序、NDIS2驱动程序应该是不能同时加载的,否则只有最后一个有效。
Packet drivers, ODI drivers, and NDIS2 drivers should not be loaded simultaneously, otherwise only the last one will be effective.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
现在只加载ODI驱动程序都不行了 服务器列表不能显示啊———怎么办
还有加载了 Packet驱动程序 的时候 是有ip的
但是运行lynx 之后那ip就不见了(说没设置ip)
Now it's not even possible to load the ODI driver alone, and the server list can't be displayed. ———What should I do?
Also, when the Packet driver is loaded, there is an IP, but after running lynx, that IP disappears (saying no IP is set).
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
那要看其它电脑是否都已连好且网络程序是否都已安装。因为它显示的是当前所有服务器的列表。Lynx的IP可以使用其DHCP方式以自动配置,而不需要手工指定。
That depends on whether other computers are all connected and network programs are all installed. Because it shows the list of all current servers. The IP of Lynx can be automatically configured using its DHCP method, without the need for manual specification.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
网线是连接好了的
先 l按次序加载 了 lsl rtsodi ipxodi
然后 net start 叫你设置密码什么的 就这样 (对不对)
我是内网的 起先加载了RTSPKT是有ip的
运行lynx之后就都边成0 了
是不是内网的关系
The network cable is connected properly. First, I loaded lsl, rtsodi, ipxodi in sequence. Then net start asks you to set a password or something like that. That's it. (Is that right?)
I'm on an internal network. At first, after loading RTSPKT, there was an IP. After running lynx, it all became 0. Is it because of the internal network?
|
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
|
2002-11-14 00:00 |
|
|
Wengier
系统支持
             “新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
要配置Lynx的IP地址,应该是编辑WATTCP.CFG文件,具体方法是将它的my_ip的值改为dhcp或具体地址即可,例如:
my_ip=dhcp或my_ip=192.168.0.1等等。
To configure the IP address of Lynx, you should edit the WATTCP.CFG file. The specific method is to change the value of my_ip to dhcp or a specific address. For example:
my_ip=dhcp or my_ip=192.168.0.1, etc.
|

Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站,里面有各类DOS软件和资料,地址:
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com (最近比较忙,有事请联系DOSroot和雨露,谢谢!)
 |
|
2002-11-14 00:00 |
|
|
流氓企鹅
中级用户
   imp
积分 312
发帖 82
注册 2002-11-9
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
怎么不能访问外面啊 连内网的 http 都不能连
是什么原因啊 是不是设置方面的问题 以下是用tcpinfo 得到的我的机子的信息
IP Address : 10.2.26.5
Network Mask : 255.255.255.0
Gateways : GATEWAY''S IP SUBNET SUBNET MASK
: 10.2.26.254 DEFAULT
Cookieserver : NONE DEFINED
Nameservers : 192.168.0.1
: 10.0.12.252
: 203.93.242.1
: 203.93.242.3
Domain : "ningbo.cngb.com"
BOOTP : USED
: SUCCEEDED
BOOTP Server : BROADCAST
BOOTP Timeout : 30 seconds
(这东东怎么不能看图片)
Why can't I access the outside? I can't even connect to the internal network's HTTP. What could be the reason? Is it a setting issue? The following is the information of my machine obtained using tcpinfo:
IP Address : 10.2.26.5
Network Mask : 255.255.255.0
Gateways : GATEWAY''S IP SUBNET SUBNET MASK
: 10.2.26.254 DEFAULT
Cookieserver : NONE DEFINED
Nameservers : 192.168.0.1
: 10.0.12.252
: 203.93.242.1
: 203.93.242.3
Domain : "ningbo.cngb.com"
BOOTP : USED
: SUCCEEDED
BOOTP Server : BROADCAST
BOOTP Timeout : 30 seconds
(Why can't this thing view images)
|
|
2002-11-14 00:00 |
|