中国DOS联盟

用dos上网，不起动windows，局域网内，ip自动分配的。能否告诉我具体该如何操作呢？

先加载8139网卡的Packet驱动程序,再运行浏览器就可以了.8139网卡的Packet驱动程序可在RealTek网站中下载.

斑竹，我好不容易找到了8139的rtspkt.com，可是运行lynx的时候，却提示“Configuration file /dev/env/DJDIR/lib/lynx.cfg is not available.”但是，此时根目录里面已经有了lynx.cfg,我又下载了网站提供的此文件，还是不行：（能不能提示一下因为什么呢？

对了，还有一个问题rtspkt.com怎么使用的？脸红。。

不好意思，对dos，我们这些人懂得太少了。

试试这个吧：
RTSPKT 0x60

我已经明白了0x60为中断号，可是，关于那个“提示“Configuration file /dev/env/DJDIR/lib/lynx.cfg is not available.”问题怎么解决呢？

让您费心了：）

那就先设置一下LYNX_CFG环境变量，让它指向LYNX.CFG文件吧。

由于我对dos不是很了解，因此需要斑竹多多费心了：）
怎样设置一下LYNX_CFG环境变量，让它指向LYNX.CFG文件呢？在哪一个文件里面进行调整呢？

例如你把lynx.cfg放在C:\lynx\下的話，運行lynx -cfg=c:\lynx\lynx.cfg

很惨按照 Dark-Destroy的说法，却显示：
No nameserver defined!
No nameserver defined!
"sin_mask"is 0.0.0.0 !
Cannot set local ip-address
这时应该怎么办呢？
多谢：）

你有沒有修改wattcp.cfg呢.

我说实话，我也发现与这个文件有关系，可是，看了半天，满头雾水。这个文件应该是配置dns和本机ip和其他网络选项，可我实在看不懂：（

真心希望斑竹能够举个例子说明一下。如帖出一份配置好的wattcp.cfg，再加以简短说明：）
斑竹费心了

我试过将ip＝值改为dhcp，但是我可能没有得到要点。还是不行。所以希望斑竹帖一份修改好的文件，这样比较直观。

是这个吧：

#
# Waterloo TCP/IP sample configuration file.
#
# Use this file as a template to make your own.
# This file should be located in "current directory" or in a directory
# pointed to by the environment variable "WATTCP.CFG".
#
# E.g. Put a copy of this file in "c:\net\watt\bin" and insert this
# line in your AUTOEXEC.BAT:
# set wattcp.cfg=c:\net\watt\bin
#
# Note 1: No trailing `\' at end of line, and no spaces around the `='.
#
# Note 2: The order of keywords/value pairs are significant.
# For instance, if you have "my_dns = 134.121.10.8" in your
# "c:\net\watt\bin\hosts" file, then "hosts = c:\net\watt\bin\hosts"
# MUST be listed before the line specifying your nameserver;
# "nameserver = my_dns". The same rule applies to "gateway" and "cookie"
#
# Note 3: the value (right of `=') is the default if you comment the
# line out. Comments starts with `#' or `;'. To use `#' or `;' inside
# string values, the string MUST be put in quotes.
# E.g. these keywords have different values:
# keyword1 = "hello world #;"
# keyword2 = "hello world "#;
#
# Note 4: The right-side value may contain an environment variable that
# will be expanded when read. The effect is like in makefiles.
# E.g. if environment variable "ETC" is "c:\net\watt\bin",
# "$(ETC)\hosts" becomes "c:\net\watt\bin\hosts" after
# expansion. See "README.TOO" for details.
#
# Note 5: Remember that all this text takes time to parse (especially on
# a 386 or older CPU). Cut down the contents of your "WATTCP.CFG" (not
# this file, a copy) to a minimum to improve speed.
#
#
# Text printed to screen (stdout).
#
# print = "Waterloo TCP/IP setup" ; optional key/value

#
# If using a fixed IP-address, insert the dotted decimal address below.
# If your LAN has a DHCP server, use "my_ip = dhcp".
# Likewise, if you want to get your IP-address via BOOTP or RARP servers.
#
# my_ip = 192.168.1.2 ; really is 0.0.0.0, mandatory
my_ip=dhcp

#
# The name of this host excluding the domain-name.
# Note: may be overridden by DHCP/BOOTP server.
# Max 50 characters.
#
# hostname = "random-pc" ; optional

#
# A better method would be to define it via the environment.
# If djgpp is installed and you have the djgpp `uname' program, then
# use $(COMPUTERNAME) if running under Windows for consistent names
# here.
#
#hostname = $(COMPUTERNAME)

#
# The netmask specifying the sub-net your are on.
# Note: may be overridden by DHCP/BOOTP server.
#
netmask = 255.255.255.0 ; mandatory if not using DHCP

#
# IP-address (or name) of DNS host(s). The DNS host's job is to
# translate hostnames to IP-addresses if the hostname isn't listed
# in "$(ETC)\hosts".
#
# Notes: DHCP/BOOTP servers may add additional nameservers to the one(s)
# you specify here.
# There are no default server. There can be a total of 10
# nameservers. All nameserver are queried in sequence until an
# IP-address is returned. Enter the "fastest" (closest) nameserver
# first for best result.
#
# nameserver = 0.0.0.0 ; primary DNS, mandatory if not using DHCP
# nameserver = 0.0.0.0 ; secondary DNS, optional

#
# The IP-address (or name) of your gateway.
# If you are running DOS-PPP with EtherNet emulation this should be
# replaced with $(REMIP). For SLIP or normal PPP, gateway is not used.
#
# The syntax is "ip-addr ]"
#
# Notes: Will most likely be overridden by DHCP/BOOTP server.
# The ARP-routing table is limited to 12 gateways.
#
# gateway = 0.0.0.0 ; mandatory if not using BOOTP/DHCP

...以下略.

我的lynx再c盘aaa目录，运行下列命令：
lynx -cfg=c:\aaa\lynx.cfg www.163.com
则会显示
Looking up www.163.com first
Looking up www.163.com.com, guessing...
Looking up www.163.com.edu, guessing...
Looking up www.163.com.net, guessing...
Looking up www.163.com.org, guessing...
Can't Access `file://localhost/c:/aaa/www.163
Alert!: Unable to access document.

lynx: Can't access startfile
这现象，应该是那里的问题呢？