|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『楼 主』:
关于飞利浦sata光驱在dos下驱动的问题！
使用 LLM 解释/回答一下
惠普与dell最新的几款台式机不约而同的采用了型号为drom6316的sata-dvd，原来在网上曾出现的GCDROM驱动对其已经无效，望大家帮忙找一找，不胜感激！
我提取了其在win下的驱动！
附件很小直接发到论坛上了
HP and Dell's latest models of desktops have adopted the SATA-DVD with model number DROM6316 simultaneously. The previously appeared GCDROM driver on the Internet is no longer effective for it. Hope everyone can help find it. Many thanks!
I extracted its driver under Windows!
The attachment is very small and directly sent to the forum.
附件
1:  sata.rar (2007-4-6 02:03, 66.67 KiB,下载次数： 232)
|
|
 2007-4-6 02:03 |
|
|
abelzeng
新手上路
积分 16
发帖 7
注册 2007-4-4
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
我装过的dellc21n是用的sony的SATA光驱.不知道用gcdrom可以吗?
我也一直在找这个dos下的sata光驱的通用驱动.几乎所有的万能ghost光盘(至少是我用过的)都无法支持sata光驱.现在只好用移动硬盘装系统.
The Dell C21n I installed used a Sony SATA optical drive. I wonder if GCDROM can be used? I've been looking for a general-purpose driver for SATA optical drives under DOS. Almost all universal Ghost CDs (at least the ones I've used) can't support SATA optical drives. Now I have to install the system using a portable hard drive.
|
|
|
2007-4-6 04:56 |
|
|
bingchong
初级用户
积分 152
发帖 21
注册 2003-1-21
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
本论坛上以前的贴子有为兄弟发了一个dell的sata驱动，至少在我的并口转sata卡
再接主板sata口上正常。gdrom的不能使用。细心点好好发掘本论坛吧。
There were previous posts in this forum that provided a Dell SATA driver, which worked normally at least when I used a parallel port to SATA card connected to the motherboard's SATA port. The GDROM cannot be used. Be careful and dig into this forum carefully.
|
|
|
2007-4-6 09:38 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
Originally posted by bingchong at 2007-4-5 08:38 PM:
本论坛上以前的贴子有为兄弟发了一个dell的sata驱动，至少在我的并口转sata卡
再接主板sata口上正常。gdrom的不能使用。细心点好好发掘本论坛吧。
我试着找了找，没有发现，兄弟能提吗？
Originally posted by bingchong at 2007-4-5 08:38 PM:
There was a previous post in this forum where a brother posted a Dell SATA driver, which worked normally at least on my parallel port to SATA card connected to the motherboard's SATA port. The GDROM cannot be used. Carefully explore this forum.
I tried to find it but didn't find it. Brother, can you provide it?
|
|
|
2007-4-6 11:22 |
|
|
bingchong
初级用户
积分 152
发帖 21
注册 2003-1-21
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
呵呵 试试吧看看行不，加载方式就不用说了吧
Hehe, let's try it and see if it works. There's no need to talk about the loading method, right?
附件
1: extcd.rar (2007-4-6 11:50, 2.29 KiB,下载次数： 252)
|
|
|
2007-4-6 11:50 |
|
|
bingchong
初级用户
积分 152
发帖 21
注册 2003-1-21
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
哦对了，试成功的兄弟回个贴，看看兼容性如何！
Oh right, brothers who have succeeded in the test, please post a reply to see how the compatibility is!
|
|
|
2007-4-6 12:01 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
谢谢了，如果图省事，直接改名字也可以把！
刚才找到了那个帖子！最后说光驱固定名字为EXTCD001，是这样吗？
Thanks. If it's easy, you can just change the name directly! Just now I found that post! It finally said that the CD-ROM is fixed with the name EXTCD001. Is that so?
|
|
|
2007-4-6 12:01 |
|
|
bingchong
初级用户
积分 152
发帖 21
注册 2003-1-21
状态 离线
|
『第 8 楼』:
使用 LLM 解释/回答一下
好像在config中不加参数，在设备名称中自动为 EXTCD001
auto中 我的如下 IF EXIST EXTCD001 LH %PATH%\SHSUCDX.COM /D:EXTCD001
改名称懒得试了，留给你试试吧 嘿嘿
It seems that if you don't add parameters in the config, it automatically becomes EXTCD001 in the device name. In auto, mine is as follows: IF EXIST EXTCD001 LH %PATH%\SHSUCDX.COM /D:EXTCD001. I'm too lazy to try changing the name, leave it for you to try, heh heh
|
|
|
2007-4-6 12:06 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 9 楼』:
使用 LLM 解释/回答一下
谢谢知道，能不能分享一下config和auto，呵呵！学习一下
Thanks for knowing, can you share config and auto, hehe! Learn about it
|
|
|
2007-4-6 12:21 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 10 楼』:
使用 LLM 解释/回答一下
对了你使用的光驱是什么牌子
By the way, what brand of CD-ROM drive are you using?
|
|
|
2007-4-6 12:23 |
|
|
bingchong
初级用户
积分 152
发帖 21
注册 2003-1-21
状态 离线
|
『第 11 楼』:
使用 LLM 解释/回答一下
可以给你就是太乱了都好几年没整理了只是最近加入了个sata光驱，看不懂不负责培训啊。
cd么 是 先锋 112xl sata卡转接的
最近正在组装启动cd，你也研究模？
It's just too messy, it hasn't been sorted out for several years. It's just that I recently added a SATA optical drive, I don't understand it and won't be responsible for training. The CD is Pioneer 112XL, connected via SATA card adapter. I'm recently assembling a boot CD, do you also study the mode?
附件
1: 桌面.rar (2007-4-6 12:31, 5.28 KiB,下载次数： 158)
|
|
|
2007-4-6 12:31 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 12 楼』:
使用 LLM 解释/回答一下
最近碰到惠普的新系列，原来的sata驱动不行，才又开始弄！
我做维护的！
Recently encountered the new series of HP, the original SATA driver doesn't work, so I started doing it again!
I do maintenance!
|
|
|
2007-4-7 00:31 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 13 楼』:
使用 LLM 解释/回答一下
不是一般的复杂，有装在c盘的工具，还有安装cd kay，看晕了，还有logo！
It's not generally complicated. There are tools installed on the C drive, and there's also an installation CD key. It's confusing. There's also a logo!
|
|
|
2007-4-7 00:36 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 14 楼』:
使用 LLM 解释/回答一下
DEVICE=A:\BOOT_SYS\EXTCD.SYS
加载的dell的1394、usb驱动?
4DOS.COM是什么程序？
Last edited by niutao1 on 2007-4-6 at 12:45 PM ]
DEVICE=A:\BOOT_SYS\EXTCD.SYS
Loaded Dell's 1394, USB drivers?
What program is 4DOS.COM?
Last edited by niutao1 on 2007-4-6 at 12:45 PM ]
|
|
|
2007-4-7 00:53 |
|
|
niutao1
初级用户
积分 94
发帖 41
注册 2007-1-22
状态 离线
|
『第 15 楼』:
使用 LLM 解释/回答一下
我写了一组简单的配置，麻烦看一下！
auto
@echo off
IF "%config%"=="SATA_CDROM" GOTO SATA
LH SHSUCDX.COM /D:EXTCD001
%CDROM%:
CD\ghost
ghost -clone,mode=pload,src=tebieO8.gho:1,dst=1:1 -sure -rb
echo.
GOTO QUIT
:SATA
LH SHSUCDX.COM /D:MSCD000
%CDROM%:
CD\ghost
ghost -clone,mode=pload,src=tebieO8.gho:1,dst=1:1 -sure -rb
config
[menu]
menuitem=ExtcdSata_CDROM, Start computer with ExtcdSata CD-ROM support.
menuitem=SATA_CDROM, Start computer with SATA CD-ROM support.
menucolor=7,0
[ExtcdSata_CDROM]
devicehigh=himem.sys /testmem:off
DEVICE=extcd.sys /D:EXTCD001
devicehigh=ramdrive.sys /E 4096
[SATA_CDROM]
devicehigh=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000
devicehigh=ramdrive.sys /E 4096
[COMMON]
files=20
buffers=30
dos=high,umb
stacks=9,256
lastdrive=z
I wrote a set of simple configurations, please take a look!
auto
@echo off
IF "%config%"=="SATA_CDROM" GOTO SATA
LH SHSUCDX.COM /D:EXTCD001
%CDROM%:
CD\ghost
ghost -clone,mode=pload,src=tebieO8.gho:1,dst=1:1 -sure -rb
echo.
GOTO QUIT
:SATA
LH SHSUCDX.COM /D:MSCD000
%CDROM%:
CD\ghost
ghost -clone,mode=pload,src=tebieO8.gho:1,dst=1:1 -sure -rb
config
menuitem=ExtcdSata_CDROM, Start computer with ExtcdSata CD-ROM support.
menuitem=SATA_CDROM, Start computer with SATA CD-ROM support.
menucolor=7,0
devicehigh=himem.sys /testmem:off
DEVICE=extcd.sys /D:EXTCD001
devicehigh=ramdrive.sys /E 4096
devicehigh=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000
devicehigh=ramdrive.sys /E 4096
files=20
buffers=30
dos=high,umb
stacks=9,256
lastdrive=z
|
|
|
2007-4-7 02:18 |
|
