『楼 主』:
用FLASHBOOT的问题!
使用 LLM 解释/回答一下
我原来的U盘一直在我的老机器(815主板)上用做启动盘,启动进DOS盘符是a:\ 但在几台朋友的机器上都不能用!我在上面装了GRUB 很方便的!最近机器大修,换了865的板,用U盘进去dos盘符变为 c:\ 很不方便,而且把我的U盘识别为HD1 使得我原来装上的grub都不能用!
今天用FLASHBOOT重新把老U盘做成启动盘 进去的是盘符a:\我想这下可以了又回到原来的了想装GRUB时 却发现我进不了硬盘其他区!有那位用过的知道是怎么回事吗?而且AUTOEXEC文件没用,现在好想只能进DOS 能看到U盘里文件 就打开一个EDIT也是乱码 盘符倒是我想要的a:\ 就是在盘里的文件不能打开启动 包括TW.exe 批处理也打不开!
(顺便说一下,制作时我选的是我原来的3个启动文件 用FLASHBOOT自带的做了一次进去老是提示什么 我就用原来的启动文件做了)
Last edited by terse on 2006-12-29 at 12:44 PM ]
My original USB flash drive was always used as a bootable disk on my old machine (815 motherboard), and when booted into DOS, the drive letter was a:\. But it didn't work on several friends' machines! I installed GRUB on it, which was very convenient! Recently, the machine was overhauled, and I changed to an 865 motherboard. When using the USB flash drive to enter DOS, the drive letter became c:\, which is very inconvenient, and my USB flash drive was recognized as HD1, making the GRUB I originally installed unusable!
Today, I used FLASHBOOT to re-make the old USB flash drive into a bootable disk. When entering, the drive letter was a:\. I thought it would be okay and back to the original situation. When I wanted to install GRUB, I found that I couldn't enter other partitions of the hard disk! Does anyone who has used it know what's going on? And the AUTOEXEC file doesn't work. Now it seems I can only enter DOS. I can see the files in the USB flash drive, but opening an EDIT also shows garbled characters. The drive letter is the a:\ I want, but the files in the drive can't be opened and started, including TW.exe and batch files can't be opened!
(By the way, when making it, I selected my original 3 boot files. I used FLASHBOOT's own to make it once and it always prompted something, so I used the original boot files to make it.)
Last edited by terse on 2006-12-29 at 12:44 PM ]
|
