访问这里,这里有你要的所有dd
http://zw963.ys168.com
看了看邮箱,发现有很多人人问我如何制作支持U盘启动的大容量
映像文件,其实太简单了。你需要两个软件。Winimage&ramdiskNT。
首先您安装ramdiskNT,然后虚拟一个你需要大小的虚拟磁盘空间。然后
用winimage选择该磁盘并读取生成映像文件(ima格式)。以msdos启动盘
为例,随便找一个标准1.44兆启动盘映像,用winimage保存引导扇区属
性功能保存其引导文件。一般为512字节大小的一个bin文件。然后再用
winimage打开您制作的任意大小的映像文件倒入该bin文件。再拷贝msd
os.sys、iodos.sys、command.com三个文件到你的映像文件中就ok了。
以上提到的两个工具请到正维精品
http://zw963.ys168.com
精品软件推荐区下载。并附送64兆可启动映像实例一个提供下载。其中只有
必需的几个文件,顺便带了本人修改的PDOS95,自带DOS下的微软拼音输入法,
比天汇兼容汉字系统的输入法好多了!本映像用winimage优化过碎片,所以只
有几百k,但其容量可不是这么一点哦。如果你希望U盘启动,直接用winimage
写入U盘所在驱动器就好了。
欢迎常常访问正维精品。
http://zw963.ys168.com
请相信我,这里除了精品...还是精品...没其他什么了~
Last edited by zw963 on 2005-7-18 at 21:44 ]
Visit here, here are all the dd you need
http://zw963.ys168.com
I looked at the email and found that many people asked me how to make a large-capacity image file that supports USB flash drive booting. In fact, it's too simple. You need two software: Winimage & ramdiskNT. First, you install ramdiskNT, then virtualize a virtual disk space of the size you need. Then use winimage to select this disk and read to generate an image file (ima format). Take the MS-DOS boot disk as an example, randomly find a standard 1.44MB boot disk image, use winimage to save the boot sector attribute function to save its boot file. It is generally a bin file of 512 bytes in size. Then use winimage to open the image file of any size you made and import this bin file. Then copy the three files msdos.sys, iodos.sys, command.com to your image file and it's done.
The two tools mentioned above can be downloaded from the Featured Software Recommendation area of Zhengwei Boutique
http://zw963.ys168.com. And a 64MB bootable image example is provided for download. There are only a few necessary files. By the way, PDOS95 modified by me is brought, which has the Microsoft Pinyin input method under DOS, which is much better than the input method of the Tianhui compatible Chinese character system! This image has been optimized for fragmentation with winimage, so it is only a few hundred KB, but its capacity is not so small. If you want to boot from a USB flash drive, just use winimage to write to the drive where the USB flash drive is located.
Welcome to visit Zhengwei Boutique often.
http://zw963.ys168.com
Please believe me, here except for the boutique... still the boutique... there is nothing else~
Last edited by zw963 on 2005-7-18 at 21:44 ]