『楼 主』:
有谁在玩GEEXBOX
使用 LLM 解释/回答一下
我的超级U盘系统上传好了，网址在五楼。另外四楼有一个硬盘版的geexbox，含非常多的解码器和硬件支持，比网上其他的都多一些。
GEEXBOX我成功的放在U盘上了，没有我在2楼上说的问题，上面代码里是有U盘启动的入口的。我的U盘系统盘已经做好，现还在进行最后的测试，先在这里做个简要介绍。
这是我制作的一个集系统维护、DOS下使用局域网和因特网、DOS下的多媒体、WINXPE、GEEXBOX、FANX的全功能优盘，有许多特色，简要介绍如下：
本优盘是USB_ZIP启动模式，提示符为a:。
根目录下的文件除了txt文件外，其他的都不能删除。
根目录下DOS中是启动时会用到的一些程序。
根目录中另一个目录就是BOOT，所有的工具都集中在里面：
encrypt.exe，运行他，会提示输入一个密码，这个程序会修改password.sys，以后你启动DOS时会要求你输入前面的那个密码。不要忘记了，但真要忘了，在XP下再运行一次encrypt.exe，再输入一个就行了。
BOOT下其他的程序都很常用，这里不作介绍。
BOOT下的目录：
其下有另一个BOOT目录，这里有MSDOS下启动，即用autoexec.bat及config.sys启动时要用到的一些，如win32，win98,矮人的DOS工具 ，FANX，局域网(只支持我的8139网卡，要用其他的做点修改就行了，网卡驱动到\BOOT\NET\PACKET里找。里面有很多是源程序，只有com或exe文件才是要用的驱动，这里还没做整理)。
CAI目录，是DOS下的TT和WT，练英文和五笔输入法的程序，读书时用过，所以收藏在此了。
cmosmenu目录，修改和备份CMOS的工具。
disktool目录，里面有一些恢复数据和修复硬盘的程序，大名鼎鼎的DM和磁盘精灵DISKGEN，PQMAGIC(7.0的版本，有点低)也放在这里。
drv目录，是DOS常用的驱动，有USB，NTFSPRO，IFS、IEEE1394以及笔记本电脑上的PC卡驱动。
ext目录，是一些DOS扩展程序，有汉字系统TW，中国龙，WPS，还有程序管理器seal2,dn,,nc,vc等。
ghost目录，包括8.3版和11版的，如果你从不用11版的，可以删除。
grub目录，是启动引导工具，里面有一个BOOT目录，用GRUB启动的一些IMG文件和GEEXBOX放在这里。
media目录，里面包括很多多媒体工具，全是网上收集的，感谢中国DOS联盟和新DOS时代网站。
net目录，包括上因特网和局域网中使用的大量工具，以及DOS下网卡的可执行驱动程序。
以上就简单的作这些介绍。
这个优盘版的内容很多，所以得要一个512M的优盘，如果觉得大了，可以去掉FANX或GEEXBOX，分别删除\BOOT\BOOT\FANX和\BOOT\GRUB\BOOT\GEEXBOX，然后修改根目录下的menu.lst与autoexec.bat、config.sys里的相应入口即可，这样最后就可以放在256M盘中。如果你只要用一用FANX或GEEXBOX，那更简单，FANX可以直接在DOS下用loadin启动，把它加到autoexec.bat中就行，GEEXBOX用grub启动，启动参数参照根目录中menu.lst即可。
希望大家喜欢我做的这个“玩具”。
闵成安
2007年6月
Last edited by minchengan on 2007-6-8 at 05:00 PM ]
My super USB flash drive system has been uploaded, and the URL is on the fifth floor. Additionally, there is a hard disk version of geexbox on the fourth floor, which contains a large number of decoders and hardware support, a bit more than others on the Internet.
I successfully put GEEXBOX on the USB flash drive, and there are no issues as I mentioned on the second floor. There is an entry for USB flash drive boot in the above code. My USB flash drive system disk has been made, and it is currently undergoing final testing. I will briefly introduce it here.
This is a full-function USB flash drive I made that integrates system maintenance, using local area network and Internet under DOS, multimedia under DOS, WINXPE, GEEXBOX, FANX. There are many features, and the brief introduction is as follows:
This USB flash drive is in USB_ZIP boot mode, with the prompt being a:.
Except for txt files, no other files in the root directory can be deleted.
The DOS in the root directory contains some programs that will be used during startup.
Another directory in the root directory is BOOT, where all tools are concentrated:
encrypt.exe, run it, it will prompt you to enter a password. This program will modify password.sys, and later when you start DOS, it will ask you to enter the previous password. Don't forget it, but if you really forget, run encrypt.exe again under XP and enter another one.
The other programs under BOOT are very commonly used, so no introduction here.
Directories under BOOT:
There is another BOOT directory under it. Here are some things needed for MSDOS startup, that is, some things needed when starting with autoexec.bat and config.sys, such as win32, win98, dwarf's DOS tools, FANX, local area network (only supports my 8139 network card, you need to make some modifications if using other ones. The network card driver can be found in \BOOT\NET\PACKET. There are many source programs in it, only com or exe files are the drivers to be used. The organization here is not done yet).
CAI directory is the TT and WT under DOS, programs for practicing English and Wubi input method. I used it when studying, so it is collected here.
cmosmenu directory, tools for modifying and backing up CMOS.
disktool directory, there are some programs for restoring data and repairing hard disks. The famous DM and disk wizard DISKGEN, PQMAGIC (version 7.0, a bit old) are also placed here.
drv directory, common DOS drivers, including USB, NTFSPRO, IFS, IEEE1394 and PC card drivers on laptops.
ext directory, some DOS extension programs, including Chinese character system TW, China Long, WPS, and program manager seal2, dn,, nc, vc, etc.
ghost directory, including version 8.3 and version 11. If you never use version 11, you can delete it.
grub directory, boot guide tool. There is a BOOT directory under it. Some IMG files started by GRUB and GEEXBOX are placed here.
media directory, including many multimedia tools, all collected from the Internet. Thanks to China DOS Union and New DOS Era website.
net directory, including a large number of tools for using the Internet and local area network under DOS, as well as executable drivers for network cards under DOS.
The above are simply introduced like this.
There is a lot of content in this USB flash drive version, so a 512M USB flash drive is needed. If you think it is large, you can remove FANX or GEEXBOX. Delete \BOOT\BOOT\FANX and \BOOT\GRUB\BOOT\GEEXBOX respectively, and then modify the corresponding entries in menu.lst, autoexec.bat, and config.sys in the root directory. Then finally it can be placed in a 256M disk. If you only want to use FANX or GEEXBOX, it is simpler. FANX can be directly started with loadin under DOS, add it to autoexec.bat. GEEXBOX is started with grub, and the startup parameters refer to menu.lst in the root directory.
I hope everyone likes this "toy" I made.
Min Chengan
June 2007
Last edited by minchengan on 2007-6-8 at 05:00 PM ]
|
