大家好，有没有人知道DOS下如何用量产USB-CDROM做一键GHOST
下面的是我自己做的，只能在老一点的机器上用，最新的电脑老是说找不到光驱
这是我的autoexec.bat

@ECHO OFF
smartdrv.exe
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=%RAMD%:\
set tmp=%RAMD%:\
path=%RAMD%:\;a:\;%CDROM%:
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL

:ERROR
IF EXIST ebd.cab GOTO EXT
echo Please insert Windows 98 Startup Disk 2
echo.
pause
GOTO ERROR

:EXT
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.
IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="HELP" GOTO HELP
echo.
GOTO QUIT

:HELP
cls
call help.bat
echo Your computer will now restart and the startup menu will appear.

restart.com
GOTO QUIT

:QUIT

echo.
devload.com Usbaspi.sys /norst /nocbc /r /e
devload.com USBCD.SYS /D:usbcd001
goto end

:end
LH MSCDEX.EXE /D:mscd001 /D:usbcd001 /L:%CDROM%
LH DOSKEY.COM > NUL
findcd /s>nul
%CDROM%:
ghost -nousb -noide -clone,mode=pload,src=ghostxp.gho:1,dst=1:1 -crcignore -sure -rb


下面的是config.sys


device=himem.sys /testmem:off
devicehigh=RAMFD.SYS


files=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys /E 8192
lastdrive=z


老是说找不到光驱
ERROR: Target USB device not found

Last edited by panqunzhou on 2010-7-10 at 01:49 ]

新主板 就是这样，我也不明白 是为何，你试试不加载 Usbaspi.sys 驱动看看。

楼主，你写的，看的我都要头晕了。。。