标题: vide-cdd.sys & Shsucdx.com [打印本页]

---

作者: hulongzhuo     时间: 2007-7-6 11:00    标题: vide-cdd.sys & Shsucdx.com

只知道是光驱加载和光驱盘符分配的,但是看到有很多种参数用法,但又找不到具体说明,所以请路过的帮我解说一下这两个东东具体加参数用法,

vide-cdd.sys
Shsucdx

[ Last edited by hulongzhuo on 2007-7-7 at 08:39 AM ]

---

作者: hulongzhuo     时间: 2007-7-7 08:39
倒,一个人也不回!!!

---

作者: bc12060101     时间: 2007-7-7 09:46
Examples
    ========
    device=VIDE-CDD.SYS /D:IDE-CD

    SHSUCDX /D:SHSU-CDH

    SHSUCDX finds the first available drive letter and assigns it to  device
    unit  0  of  the  driver SHSU-CDH.        If there is a second and/or third CD
    drive they are assigned to        the  next  available  letters  in  sequence.
    Drive letters in use are skipped.  The first CD supported by a driver is
    device unit 0 regardless of its SCSI address.

    SHSUCDX /D:IDE-CD,F /D:?USB-CD,U /D:*SHSU-CDH,W /L:0

    Assign drive F to the IDE-CD driver, or abort if it is  not  loaded.  If
    the  USB-CD driver is loaded, assign it to drive U; else do nothing.  If
    the SHSU-CDH driver is loaded, assign it to drive W; else reserve  space
    for  it,  so  it can be loaded later.  SHSUCDX will return the number of
    drives assigned (or 252 if aborted).

    SHSUCDX /L:0

    If SHSUCDX is not installed, it will return 255; otherwise the number of
    assigned drives (which can be 0).  In either case, nothing is displayed.

    SHSUCDX /D:CD001,,1,1 /D:CD001,,4,1

    SHSUCDX assigns the first available drive letter to device unit 1 of the
    driver  CD001 and the next letter to unit 4.  This allows access to non-
    contiguous drive units without having to support un-needed units.

---

作者: hulongzhuo     时间: 2007-7-7 11:36
谢谢楼上的兄弟,不过要是中文解说就好了,
翻译的还是看不懂,

---

作者: 181801669     时间: 2007-7-30 21:44
偶也不懂呀

---

作者: mytest     时间: 2008-3-4 01:30    标题: test

test