『楼 主』:
如何在DOS下停用soundblaster PCI 128的game port
使用 LLM 解释/回答一下
我有一Pentium III的主板,內建soundblaster PCI 128聲卡,聲卡有ㄧgame port接口,主板的BIOS僅能設定開啟或關閉此AC 97' audio,主板有一ISA 插槽插了Thrustmaster ACM game card卡有2個game port接口,主板系統是windows 98SE,也安裝了MSDOS 7.1,在win98系統我已經把soundblaster PCI 128的game port停用,保留使用ACM game card,我的問題是當我開機在MSDOS 7.1系統時,soundblaster PCI 128和ACM game card的game port會相衝,請教有什麼方式在DOS下能設定停用soundblaster PCI 128的game port?
有關在DOS的autoexec.bat有指令
set blaster=a220 i7 d1 h5 t6
附帶其他信息以下:
ACM game card本身只有位址(address),不用DMA及IRQ,唯一卡上有兩組跳針(jumper)可設定位址,一組是
0201h
0203h
0205h
0207h
另一組是
0209h
020Bh
020Dh
020Fh
I have a Pentium III motherboard with a built-in Sound Blaster PCI 128 sound card. The sound card has a game port interface. The BIOS of the motherboard can only set to enable or disable this AC 97' audio. The motherboard has an ISA slot with a Thrustmaster ACM game card inserted, which has 2 game port interfaces. The motherboard system is Windows 98SE, and MSDOS 7.1 is also installed. In the Windows 98 system, I have disabled the game port of the Sound Blaster PCI 128 and kept using the ACM game card. My question is that when I boot into the MSDOS 7.1 system, the game ports of the Sound Blaster PCI 128 and the ACM game card conflict. Please advise what way can be used to set to disable the game port of the Sound Blaster PCI 128 under DOS?
There are commands in the autoexec.bat under DOS:
set blaster=a220 i7 d1 h5 t6
Additional information is as follows:
The ACM game card itself only has an address, no DMA and IRQ are used. There are only two sets of jumpers on the card to set the address. One set is
0201h
0203h
0205h
0207h
The other set is
0209h
020Bh
020Dh
020Fh
|
