|
sky123456
新手上路

积分 6
发帖 2
注册 2008-10-18
状态 离线
|
『楼 主』:
不读取menu.lst
使用 LLM 解释/回答一下
用的是grubinst在U盘上安装的GRUB4DOS
版本grub4dos-0.4.4-2008-08-08
然后拷贝 grldr GRUB.EXE到U盘根目录
可以成功启动电脑
现实是RAM-FDD启动成功
但是我发现启动的菜单是内置菜单
而不是我自己编写的menu.lst
自己导入内置菜单当然可以
但是修改麻烦 想用MENU.LST 请问怎么办?
另外问下怎么确定U盘启动后的盘符啊?
FDISK LS命令都用不了
ROOT 后显示是FD0 把菜单中的盘符改FD0后 说没有
用相对路径 SET ROOT 找不到我放的那个文件
Using grubinst to install GRUB4DOS on a USB flash drive. The version is grub4dos-0.4.4-2008-08-08. Then copy grldr and GRUB.EXE to the root directory of the USB flash drive. The computer can be successfully booted. The reality is that the RAM-FDD boot is successful. But I found that the boot menu is the built-in menu, not my own written menu.lst. Of course, importing the built-in menu is possible, but modification is troublesome. I want to use MENU.LST. Please tell me how? Also, ask how to determine the drive letter after the USB flash drive is booted? The FDISK LS commands can't be used. After ROOT, it shows FD0. After changing the drive letter in the menu to FD0, it says no. Using the relative path SET ROOT can't find the file I placed.
|
|
2008-10-18 17:31 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
嘿嘿,“用的是grubinst在U盘上安装的GRUB4DOS
版本grub4dos-0.4.4-2008-08-08
然后拷贝 grldr GRUB.EXE到U盘根目录”,居然能成功启动?而且启动的还是GRUB.EXE内置的菜单?
Heheh, "used grubinst to install GRUB4DOS on the USB flash drive
Version grub4dos-0.4.4-2008-08-08
Then copied grldr GRUB.EXE to the root directory of the USB flash drive", actually succeeded in booting? And it's booting the menu built into GRUB.EXE?
|
|
2008-10-18 18:39 |
|
|
lianjiang2004
金牌会员
     
积分 3946
发帖 1884
注册 2006-1-20
状态 离线
|
|
2008-10-18 19:07 |
|
|
sky123456
新手上路

积分 6
发帖 2
注册 2008-10-18
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
用grubinst在U盘上MBR安装的
然后拷贝grub4dos-0.4.4-2008-08-08里面的 grldr GRUB.EXE 到跟目录
新手 我说的比较乱
还需要说明什么
Installed on the U disk MBR using grubinst
Then copy grldr GRUB.EXE in grub4dos-0.4.4-2008-08-08 to the root directory
Newcomer, I'm talking in a messy way
What else needs to be explained
|
|
2008-10-18 21:36 |
|
|
bc12060101
银牌会员
    
积分 1455
发帖 712
注册 2006-1-20
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
嘿嘿,不仅说的比较乱,而且做法很错误!
“用的是grubinst在U盘上安装的GRUB4DOS
版本grub4dos-0.4.4-2008-08-08
然后拷贝 grldr GRUB.EXE到U盘根目录”——此种做法是不可能从你的u盘上成功启动grub的!注意了:是从你的u盘。
Hehe, not only is what you said rather messy, but the approach is also very wrong!
"Using grubinst to install GRUB4DOS on the USB flash drive.
Version grub4dos-0.4.4-2008-08-08.
Then copy grldr GRUB.EXE to the root directory of the USB flash drive" — this kind of approach is impossible to successfully boot GRUB from your USB flash drive! Take note: it's from your USB flash drive.
|
|
2008-10-20 12:45 |
|
|
hdst
初级用户
 
积分 36
发帖 22
注册 2008-3-9
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
楼主电脑上一定还安装着别的grub。那个grub.exe是dos下启动grub用的,你用grubinst安装grub到u盘,要在bios中把u盘设为第一启动盘,把那个写好的menu.lst和grldr考到u盘根目录,然后重启才行。
Last edited by hdst on 2008-10-22 at 20:34 ]
There must be another grub installed on the building owner's computer. That grub.exe is used to start grub under DOS. You use grubinst to install grub to the USB flash drive, set the USB flash drive as the first boot disk in BIOS, copy that written menu.lst and grldr to the root directory of the USB flash drive, and then restart.
Last edited by hdst on 2008-10-22 at 20:34 ]
|
|
2008-10-22 20:29 |
|