|
brglng
银牌会员
永遠的DOS~~~
积分 1200
发帖 466
注册 2005-2-1
来自 上海
状态 离线
|
『楼 主』:
如何从内网访问外网？
使用 LLM 解释/回答一下
我有一个ADSL Modem，在上面接出一个路由器，电脑接在路由器上面构建局域网，ADSL Modem的IP设置为192.168.7.1，路由器的IP设置为192.168.0.1，电脑的IP是路由器DHCP分配的，ADSL Modem没有开启PPPoE拨号，是用路由器进行PPPoE拨号的，现在我想在局域网内访问到ADSL Modem的设置界面，应该怎么弄？（直接输192.168.7.1连不上）
I have an ADSL Modem, connect a router to it, and connect the computer to the router to build a local area network. The IP of the ADSL Modem is set to 192.168.7.1, the IP of the router is set to 192.168.0.1, and the IP of the computer is assigned by the router's DHCP. The ADSL Modem does not enable PPPoE dial-up, and the router is used for PPPoE dial-up. Now I want to access the setup interface of the ADSL Modem in the local area network. How to do it? (Directly typing 192.168.7.1 can't connect)
|
32位才是DOS未来的希望
个人网志：http://sololand.moe |
|
 2006-8-10 13:07 |
|
|
JonePeng
金牌会员
Ｄ◎＄ Ｆαп
积分 4562
发帖 1883
注册 2004-1-19
来自 广东广州
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
ADSL的Modem不要连接路由器，再把你的电脑的网线直接连接Modem，然后在浏览器进入192.168.7.1，这样是可以的，我曾经试过。
The modem of ADSL should not be connected to the router. Then connect your computer's network cable directly to the modem. Then enter 192.168.7.1 in the browser. This is okay. I have tried it before.
|
－－－－＝＝＝＝≡≡≡≡ 我的至爱，永远是MSDOS！≡≡≡≡＝＝＝＝－－－－
 |
|
|
2006-8-12 21:21 |
|
|
雨露
管理员
DOS非常爱好者
积分 6209
发帖 2598
注册 2006-1-20
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
我曾经成功升级了ADSL Modem的固件.
2楼说的不错,ADSL的Modem不要连接路由器，把你的电脑的网线直接连接Modem，IP设置也不是随意的,每个牌子的不同,像我这个中兴的ADSL的Modem,登陆管理界面IP是192.168.1.1,本地连接的IP要设置在同一网段,如192.168.1.5.每个牌子可能不一样,我在论坛上发过一个贴,你搜索一下!
Last edited by 雨露 on 2006-8-12 at 23:28 ]
I once successfully upgraded the firmware of an ADSL Modem.
What the second floor said is quite good. The ADSL Modem should not be connected to a router. Connect your computer's network cable directly to the Modem. The IP settings are not arbitrary either. Different brands are different. For example, for this ZTE ADSL Modem, the IP to log in to the management interface is 192.168.1.1, and the IP of the local connection should be set in the same subnet, such as 192.168.1.5. Each brand may be different. I posted a thread on the forum, you can search for it!
Last edited by 雨露 on 2006-8-12 at 23:28 ]
|
|
|
|
2006-8-12 23:27 |
|
|
雨露
管理员
DOS非常爱好者
积分 6209
发帖 2598
注册 2006-1-20
状态 离线
|
|
|
2006-8-12 23:30 |
|
|
brglng
银牌会员
永遠的DOS~~~
积分 1200
发帖 466
注册 2005-2-1
来自 上海
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
这我知道，我以前就是直接连ADSL，我是上海集成的i30（烂机器啊，bs一下），地址是192.168.7.1，这我老早就试过。
但是这个ADSL Modem虽有路由功能，但LAN口只有一个，我想要两台电脑同时上，所以就买了路由器（知道可以用集线器，但是以前不懂，是听人家说的），现在如果要登录ADSL Modem的设置界面就要把插头拔下来插上去，很麻烦，有没有办法直接从子网访问到ADSL Modem？
顺便问一下，i30 有没有固件升级？
Last edited by brglng on 2006-8-14 at 15:38 ]
I know this. I used to directly connect to ADSL. I have a Shanghai Integrated i30 (a lousy machine, BS it), and the address is 192.168.7.1, which I tried long ago.
But although this ADSL Modem has a routing function, there is only one LAN port. I want two computers to access the Internet simultaneously, so I bought a router (I knew I could use a hub, but I didn't understand before, I heard it from others). Now if I want to log in to the settings interface of the ADSL Modem, I have to unplug the plug and plug it in again, which is very troublesome. Is there a way to directly access the ADSL Modem from the subnet?
By the way, does the i30 have firmware upgrades?
Last edited by brglng on 2006-8-14 at 15:38 ]
|
32位才是DOS未来的希望
个人网志：http://sololand.moe |
|
|
2006-8-14 15:37 |
|
