補述：(1)對 4.7 GB DVD Ghost備份還原燒錄，因有 UDF 格式上的問題，最好
使用 {BartPE + WinXP SP2 English + Ghost v8.3 Plugin + ...}
可支援的系統，壓製成的 ISO 約佔 230MB 左右，對 CD-R 700MB 而
言佔用系統區域太大了，另外 Ghost32 只能判讀 ISO9660 格式 DVD
備份光碟，ISO/UDF 或 UDF 格式無法讀取，因此
BartPE+WinXP SP2+Ghost32 目前只能單獨做為 CD-ROM 開機光碟。
(2)測試結果：3.87GB 備份資料 > 2GB 做為 DVD+R 還原資料試驗
a. 失敗：用 UltraISO 勾選 ISO/UDF or UDF DVD 燒錄
原因：Ghost & Ghost32 不支援 UDF DVD 格式資料光碟讀取。
b. 失敗：ISO9660 & BartPE + Ghost32 & xxx.GHO,xxx.GHS,...
燒錄在同一 DVD 光碟上
原因：BartPE + WinXP 使用 DVD 光碟開機啟動有 Bug。
"File setupdd.sys could not be loaded."
"The error code is 4"
"Setup canot continue. Press any key to exit."
c.失敗：ISO9660 & PC-DOS 7 + Ghost → CD-ROM 700MB
ISO9660 & xxx.GHO,xxx.GHS,... → DVD+R 4.7GB
原因：PC-DOS 7 +Ghost 為 CD-ROM ISO9660 開機光碟 U:
xxx.GHO,...為 DVD ISO9660 備份資料光碟 V:
DOS Ghost 無法讀取 xxx.GHO 檔案，DOS 版不支援
大於 2GB 備份資料。
d.成功：ISO 9660 & BartPE + Ghost32 → CD-ROM 700MB
ISO 9660 & xxx.GHO,xxx.GHS,...→ DVD+R 4.7GB
原因：BartPE為 CD-ROM ISO9660 開機光碟 X:
xxx.GHO,...為 DVD ISO9660 備份資料光碟 E:
Ghost32 可成功還原讀取大於 2GB DVD 備份光碟資料
至系統硬碟 C:。
(3)第一下載點：香港 Uwants 理想空間
BartPEGhost下載→
http://space.uwants.com/batch.download.php?aid=66164
第二下載點：
BartPE下載→
http://www.nu2.nu/download.php?sFile=pebuilder3110a.exe
BartPEGhost下載→中華優惠網
http://www.chinesefreewebs.com/yawnp0426/BartPEGhost/BartPEGhost.exe
http://www.chinesefreewebs.com/yawnp0426/BartPEGhost/BartPEGhost.c00
Last edited by yawnp0426 on 2006-10-10 at 23:33 ]
Supplementary notes: (1) For the 4.7 GB DVD Ghost backup, restoration, and burning, due to UDF format issues, it is best to use the system supported by {BartPE + WinXP SP2 English + Ghost v8.3 Plugin + ...}, and the compressed ISO is about 230MB. For a 700MB CD-R, the system area occupies too much. Also, Ghost32 can only read DVD backup discs in ISO9660 format, and cannot read ISO/UDF or UDF format. Therefore, BartPE + WinXP SP2 + Ghost32 can currently only be used as a CD-ROM bootable disc alone.
(2) Test results: 3.87GB backup data > 2GB for DVD+R restoration data test
a. Failure: Using UltraISO to check ISO/UDF or UDF DVD burning
Reason: Ghost & Ghost32 do not support reading data discs in UDF DVD format.
b. Failure: ISO9660 & BartPE + Ghost32 & xxx.GHO, xxx.GHS, ... burned on the same DVD disc
Reason: There is a bug in BartPE + WinXP when booting with a DVD disc.
"File setupdd.sys could not be loaded."
"The error code is 4"
"Setup cannot continue. Press any key to exit."
c. Failure: ISO9660 & PC-DOS 7 + Ghost → CD-ROM 700MB
ISO9660 & xxx.GHO, xxx.GHS, ... → DVD+R 4.7GB
Reason: PC-DOS 7 + Ghost is a CD-ROM ISO9660 bootable disc U:
xxx.GHO, ... is a DVD ISO9660 backup data disc V:
DOS Ghost cannot read the xxx.GHO file, and the DOS version does not support backup data larger than 2GB.
d. Success: ISO 9660 & BartPE + Ghost32 → CD-ROM 700MB
ISO 9660 & xxx.GHO, xxx.GHS, ... → DVD+R 4.7GB
Reason: BartPE is a CD-ROM ISO9660 bootable disc X:
xxx.GHO, ... is a DVD ISO9660 backup data disc E:
Ghost32 can successfully restore and read data from a DVD backup disc larger than 2GB to the system hard drive C:.
(3) First download point: Hong Kong Uwants Ideal Space
BartPEGhost download →
http://space.uwants.com/batch.download.php?aid=66164
Second download point:
BartPE download →
http://www.nu2.nu/download.php?sFile=pebuilder3110a.exe
BartPEGhost download → China Discount Network
http://www.chinesefreewebs.com/yawnp0426/BartPEGhost/BartPEGhost.exe
http://www.chinesefreewebs.com/yawnp0426/BartPEGhost/BartPEGhost.c00
Last edited by yawnp0426 on 2006-10-10 at 23:33 ]
