『楼 主』:
[求助]中文DOS启动盘的问题。
使用 LLM 解释/回答一下
本人笔记本(HP 4421s)的硬盘坏了,幸好还在保修期,可以更换硬盘,但可恨的售后不包数据保留,要我自己拷贝数据。
于是我尝试用WinPE,但连WinPE也识别不了我的硬盘。
然后,我打算拆出硬盘,用移动硬盘盒插入另一台计算机拷贝。没算到找遍整个笔记本的外表,没发现一个螺丝孔。由于在保修期,我不想强拆。
悲剧啊……
现在,我只能在DOS环境中,利用XCOPY命令拷贝了。但是,我的DOS启动盘(Ghost集成)却不能用XCOPY的命令,而且不能显示和输入中文(因为有中文的文件夹)。
现想请教各位高手,如何制作以下特点的DOS启动盘:
1.用U盘启动,并能识别U盘;
2.能显示和输入中文;
3.能用XCOPY命令。
由于有很多工作的数据都在笔记本中,这些资料十分重要,请各位高手帮忙解答。
谢谢!!!
My laptop (HP 4421s) has a broken hard drive. Fortunately, it's still under warranty, so I can replace the hard drive, but the hateful after-sales service doesn't guarantee data retention and asks me to copy the data myself.
Then I tried to use WinPE, but even WinPE couldn't recognize my hard drive.
Then, I planned to take out the hard drive and use a mobile hard drive enclosure to insert into another computer to copy. I didn't expect that after searching the entire appearance of the laptop, I didn't find a single screw hole. Since it's under warranty, I don't want to forcibly disassemble it.
Tragedy...
Now, I can only copy in the DOS environment using the XCOPY command. But my DOS boot disk (Ghost-integrated) can't use the XCOPY command, and can't display and input Chinese (because there are Chinese folders).
Now I want to ask all the experts, how to make a DOS boot disk with the following characteristics:
1. Boot from a USB flash drive and be able to recognize the USB flash drive;
2. Can display and input Chinese;
3. Can use the XCOPY command.
Since there are a lot of work data in the laptop, these materials are very important, please help the experts to answer.
Thank you!!!
|