|
fengbaishen
初级用户
积分 26
发帖 7
注册 2006-7-25
状态 离线
|
『楼 主』:
暂且都别说自己是“超级”启动盘了!
使用 LLM 解释/回答一下
本人虽然是初来乍到，但是各位老大的“超级”盘我算是都下载测试了，我就测试一个功能，看看这些盘是否支持USB光驱直接启动DOS,刻的光盘有21个之多，但是没有一个盘达到我的要求，都不支持USB光驱启动，我的意思是直接从USB光驱启动，不是用其他方式启动后支持USB光驱的读写，所以我觉得各位老大，还是把这个问题解决了再说自己的是“超级盘”!
Last edited by fengbaishen on 2006-7-28 at 08:42 ]
Although I'm new here, I've downloaded and tested all the "super" disks from you guys. I just tested one function, which is to see if these disks support USB光驱 direct boot into DOS. There are as many as 21 burned CDs, but none meet my requirements. None support USB光驱 boot. I mean direct boot from the USB光驱, not supporting USB光驱 reading and writing after booting in other ways. So I think you guys, the bosses, should solve this problem before claiming your disks are "super"!
Last edited by fengbaishen on 2006-7-28 at 08:42 ]
|
|
 2006-7-28 08:40 |
|
|
fujianabc
金牌会员
积分 3467
发帖 1616
注册 2004-6-21
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
这是你主板的问题，和usbaspi.sys有冲突，不是启动盘本身的问题。
This is an issue with your motherboard, there is a conflict with usbaspi.sys, not an issue with the bootable disk itself.
|
|
|
2006-7-28 09:22 |
|
|
fengbaishen
初级用户
积分 26
发帖 7
注册 2006-7-25
状态 离线
|
『第 3 楼』:
请教!
使用 LLM 解释/回答一下
Originally posted by fujianabc at 2006-7-28 09:22:
这是你主板的问题，和usbaspi.sys有冲突，不是启动盘本身的问题。
那这个问题怎么解释，如果用IDE光驱启动就能够支持USB光驱，在IDE状态下usbaspi.sys安装还是成功的啊，在USB启动状态下怎么就不成功？再者用XP SP2（番茄花园版）安装盘在USB光驱启动就可以继续安装下去，那是怎么回事？本人愚钝，请赐教？
Originally posted by fujianabc at 2006-7-28 09:22:
This is a problem with your motherboard, there is a conflict with usbaspi.sys, not a problem with the boot disk itself.
Then how to explain this problem? If you boot with an IDE CD-ROM, it can support a USB CD-ROM. When installed in IDE mode, the installation of usbaspi.sys is still successful. Why is it not successful in USB boot mode? Moreover, the XP SP2 (Tomato Garden version) installation disk can continue the installation when booted from a USB CD-ROM. How is that? I'm slow-witted, please give me some advice?
|
|
|
2006-7-28 11:44 |
|
|
fastslz
铂金会员
DOS一根葱
积分 5493
发帖 2315
注册 2006-5-1
来自 上海
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
从USB设备上启动DOS后都不能加载usbaspi.sys（包括U盘），BIOS已经有有内置USB驱动（就如同人们常说的吃了人参，不能水萝卜一样的道理），此时会出现There is an error in your CONFIG.SYS file on line ***!的现象，也就是说usbaspi.sys破坏了BIOS的内置USB驱动造成DOS无法识别CONFIG.SYS。
（番茄花园版）安装盘启动是winxp内核的，要知道DOS那个年代还没有USB光驱设备， 再说USB光驱毕竟比较少见，所以难免在USB光驱启动失败。
要实现在USB光驱启动要求制作者有相当经验的，本人没有USB光驱测试所以没法帮你。
After booting DOS from a USB device, usbaspi.sys cannot be loaded (including USB drives). The BIOS already has a built-in USB driver (just like the saying "after eating ginseng, you can't have radishes"). At this time, the phenomenon of "There is an error in your CONFIG.SYS file on line ***!" will appear, that is, usbaspi.sys damages the built-in USB driver of the BIOS, causing DOS to fail to recognize CONFIG.SYS.
The installation disc of the (Tomato Garden version) is of the winxp kernel. It should be known that there were no USB optical drive devices in the DOS era. Besides, USB optical drives are relatively rare, so it is inevitable to fail to boot from a USB optical drive.
To achieve booting from a USB optical drive, the producer needs to have considerable experience. I don't have a USB optical drive for testing, so I can't help you.
|
|
|
2006-7-28 15:00 |
|
|
llm
元老会员
积分 840
发帖 294
注册 2003-9-27
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
像当年，别说usb光驱，就是普通ide光驱都没有通用驱动
当时我还收集了不同厂商的多种光驱驱动
后来才有的vide-cdd.sys，什么版本记不清了，一路升级到现在
usb光驱问题更复杂，想要一个驱动通吃是不可能的
有本事就自己找合适的驱动，usbaspi本身就不是万能的
Like back then, not to mention USB optical drives, even ordinary IDE optical drives didn't have universal drivers. At that time, I also collected multiple drivers from different manufacturers. Later there was vide-cdd.sys, I can't remember the version, and it was upgraded all the way to now. The problem of USB optical drives is more complicated, and it's impossible to have a single driver that works for all. If you have the ability, find a suitable driver by yourself. usbaspi itself is not universal.
|
|
|
2006-7-31 00:45 |
|
|
fengbaishen
初级用户
积分 26
发帖 7
注册 2006-7-25
状态 离线
|
『第 6 楼』:
谢谢各位！
使用 LLM 解释/回答一下
多谢各位的莅临指导，确实，我还要继续找下去，刚刚在别人的帮助下，我用USBASPI测试了几台机器还是成功了，如果遇到不好用的机器我一定还会来请教各位！多谢！
Thanks to everyone for your presence and guidance. Indeed, I still need to keep looking. Just now, with the help of others, I tested several machines with USBASPI and it was successful. If I encounter a machine that doesn't work well, I will definitely come to ask for your advice again! Thanks!
|
|
|
2006-7-31 08:13 |
|
|
LanCat
中级用户
积分 288
发帖 78
注册 2003-11-19
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
要用USB光驱启动系统，并且还要能访问USB光驱，必须在加载USB驱动前，将启动光盘虚拟的启动A盘上的所有内容保存到一个可访问的地方，不然在加载完USB光驱驱动后，就无法访问到虚拟的A盘了，就会造成CONFIG.SYS或AUTOEXEC.BAT文件无法执行下去的问题。
一种方法是先建一个虚拟内存盘，然后在AUTOEXEC.BAT中A盘中将要用的文件拷到虚拟内存盘中，然后转到虚拟内存盘上，加载USB光驱的驱后，以后所用的命令，都要从虚拟内存盘上访问。
另一个方法是，加CONFIG中运行一个程序，此程序的功能是将内存虚拟成A盘，然后将原来启动光盘虚拟的A盘上的内容全部复制到此程序虚拟的A盘上。这样运行完此程序后，访问A盘实际上就不是访问启动光盘了，而是访问虚拟内存盘了，就不会出现加载USB光驱驱动后，无法访问A盘的问题了。只是这个程序我觉得没什么用，就没有保留下来了。可以上网找找USB光驱启动盘，应该有这个程序。我是在东芝PR100笔记本上配的USB光驱的启动盘上看到的。可能在东芝PR系列笔记本的系统恢复光盘上也有此程序。
Last edited by LanCat on 2006-8-1 at 23:18 ]
To boot the system with a USB CD-ROM and also access the USB CD-ROM, all contents on the virtual boot drive A from the boot CD must be saved to an accessible place before loading the USB driver. Otherwise, after loading the USB CD-ROM driver, the virtual drive A cannot be accessed, and the execution of CONFIG.SYS or AUTOEXEC.BAT files will be interrupted.
One method is to first create a virtual memory drive, then copy the files to be used in drive A in AUTOEXEC.BAT to the virtual memory drive, then switch to the virtual memory drive. After loading the USB CD-ROM driver, all subsequent commands will be accessed from the virtual memory drive.
Another method is to run a program in CONFIG to virtualize memory as drive A, then copy all contents from the original virtual drive A of the boot CD to the virtual drive A of this program. After running this program, accessing drive A is actually accessing the virtual memory drive, and the problem of not being able to access drive A after loading the USB CD-ROM driver will not occur. But I think this program is useless and did not keep it. You can search the Internet for USB CD-ROM boot disks, and this program should be available. I saw it on the boot disk of a USB CD-ROM configured on a Toshiba PR100 notebook. Maybe this program is also on the system recovery CD of Toshiba PR series notebooks.
Last edited by LanCat on 2006-8-1 at 23:18 ]
|
|
|
2006-8-1 23:16 |
|
