『楼 主』:
急，谁有DOS下USB2.0光驱驱动？
使用 LLM 解释/回答一下
我在做USB2.0光驱启动盘，总是驱动不上，我用了以下一些文件，还是不行：
DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD
DEVICE=USBASPI.SYS /R /V /NORST
DEVICE=ASPIOHCI.SYS /INT /ALL
DEVICE=ASPIUHCI.SYS /INT /ALL
DEVICE=ASPIEHCI.SYS /INT /ALL
DEVICEHIGH=DI1000DD.SYS
DEVICEHIGH=USBCD.SYS /D:USB-CD
SHELL=COMMAND.COM /P /E:640
SET TMP=C:\
SET TEMP=C:\
DOS=HIGH,UMB,AUTO
NUMLOCK=OFF
FCBSHIGH=4,0
FILESHIGH=30
BUFFERSHIGH=20,0
LASTDRIVEHIGH=32
STACKSHIGH=9,256
恳请各位帮忙，是不是我的驱动文件不够啊，还是有专门的USB2.0驱动？
I'm making a USB 2.0 CD-ROM bootable disk, but I can't get the driver to work. I used the following some files, still no good:
DEVICE=DUSE.EXE INT EMU CDW=3 DDW=3 XFER=32 DRIVES=2 CDD=USB-CD
DEVICE=USBASPI.SYS /R /V /NORST
DEVICE=ASPIOHCI.SYS /INT /ALL
DEVICE=ASPIUHCI.SYS /INT /ALL
DEVICE=ASPIEHCI.SYS /INT /ALL
DEVICEHIGH=DI1000DD.SYS
DEVICEHIGH=USBCD.SYS /D:USB-CD
SHELL=COMMAND.COM /P /E:640
SET TMP=C:\
SET TEMP=C:\
DOS=HIGH,UMB,AUTO
NUMLOCK=OFF
FCBSHIGH=4,0
FILESHIGH=30
BUFFERSHIGH=20,0
LASTDRIVEHIGH=32
STACKSHIGH=9,256
I would like to ask you all for help. Is it that my driver files are not enough, or is there a special USB 2.0 driver?
|
