中国DOS联盟

Finally, I can upload! This damn network!

I spent a lot of time making this disk, it's all in Chinese!
Even the menu has been Chinese-ized by me!
Most of the software inside is also the latest Chinese-ized version, which is very good!

The following is the detailed explanation:

I. Menu The first menu you see when you enter is the following:
Choose 1 to boot from local hard disk
Choose 2 to boot from disk A
This is the only menu in the entire disk that hasn't been Chinese-ized.
I really don't have the ability to Chinese-ize Jo.sys.

First menu Microsoft Windows 98 Disk Startup Menu

1. Boot from Hard Disk?
2. Boot from Disk A

If you choose 2 in the above menu, you will enter the following second menu.
Needless to say! Everyone who is Chinese knows it!


Second menu
Microsoft Windows 98 Operating System Boot Disk
================================================

1. Chinese DOS command line boot mode with CD-ROM
2. Chinese DOS command line boot mode without CD-ROM
3. Chinese DOS command line mode with minimal drivers loaded
4. Classification of utility software
5. Chinese help instructions

Please make a choice within 20 seconds, the default choice is the first item.

If you choose 4 in the above menu, you will enter the following third menu.
Needless to say! Choose 7 to return to the previous level menu.

Third menu
Some Tools under DOS
=============================================

1. Use KV3000 to kill viruses on the computer
2. Use HD-COPY to copy 3.5-inch disks
3. Use Chinese FDISK to partition the local hard disk
4. Use NTFSDOS to recognize NTFS partitions
5. Use COM password clearing tool
6. Use Chinese EDIT emergency text editing tool
7. Return to the previous level menu

Please make a choice within 20 seconds, the default choice is the last item.

II. Memory This boot disk uses Emm386 to manage UMB memory, so the free conventional memory is at least about 613K.
The reason is very simple, because I also put the Tianhui Chinese system into UMB.
This is also the reason why I don't use Long Chinese system.
Because I can't put the Long Chinese system into UMB, I don't know if any expert can teach me.
However, I think the Tianhui Chinese system is also very good.
At least there is a free Wubi input method, and the font is much better than the Long Chinese system.
At the same time, the shortcut keys are also more normal than the Long Chinese system.
Need to note that when choosing NTFSDOS in the third menu, the conventional memory is only more than 400K.
There is no way! NTFSDOS really eats up a lot of memory,
And because of the volume relationship, NTFSDOS is a read-only version, only can read not write.
If you need more conventional memory, choose the third item of the second menu.
3. Chinese DOS command line mode with minimal drivers loaded
This can have more than 622K of conventional memory available for use.

III. Tools It needs to be pointed out that most of the tools here are the latest Chinese-ized software.
Fdisk is from WinMe because only it supports new hard disks above 80G.
Win98's Fdisk should retire.
KV3000 is the latest version.
HD-COPY is not the latest.
However, as Niu Yunfei said, the 2.0 version is the best.

IV. Installation Although the functions of this disk are not too complete, they are all very practical, and it is really all in Chinese.
The file uses the Ima file made by WinImage6.10, which can be written to a floppy disk with WinImage6.10.
At the same time, the Ima file can also be directly burned into a bootable CD with nero.
Please take a good look at the readme file in the disk, (the Win98 readme that was hard to Chinese-ize)
There are my contact information in it. If you have any questions, contact me.

The first two below are Win98.ima, and the last one is the Chinese version of WinImage6.10
After downloading, rename it to win98.part1.rarOpen attachment
After downloading, rename it to win98.part2.rarOpen attachment
Chinese version of WinImage6.10Open attachment

Strongly Suggest Moderator
Why can't I upload files larger than 1Mb again!
Strongly suggest that files with *.exe can be uploaded (that is, self-extracting files made with WinRAR)
In this way, the versatility can also be stronger.
At the same time, I can also compress with other compression software.
For example, WinImg, WinAce, so the compression ratio can also be higher.
Also, it is required that files with *.cab can be uploaded (the reason needs no explanation)

There are also some notes on using WinRAR: I. Use the solid option (can increase the compression ratio by 20% - 50%)
II. Use multimedia compression (absolutely needed for versions before 3.0)
III. Set the dictionary to the maximum (the maximum for 3.0 is 4Mb)
IV. Set the compression method to the best.

Good job. Let's study it...

It is best to note that this is a Win98 DOS 7.1 boot disk (after all, this is a DOS boot disk, otherwise it wouldn't be placed in the "DOS Boot Disks" section), otherwise others will mistakenly think that this disk can boot Win98.

The statement by wengier is not rigorous.

What does "Master Ru Shi" mean?

Minme used to be (i.e., dos80) all extensions of DOS and graphical work interfaces. How to demarcate? After win2000, it is not the original win either

Yeah, doesn't it still mean this is a MS-DOS 7.1 (from Win98) bootable disk?

May I ask, why not use the newer and better FINDRAMD but use the old one? The old FINDRAMD program is particularly cumbersome to use and greatly slows down the boot speed (you can see the FINDRAMD.BAT and SETRAMD.BAT files inside and it will loop repeatedly many times).

That's good. Making it into a burnable CD and a USB flash drive will make it easier to carry.

Getting praise from the party committee leadership is no easy matter, you know.

In fact, whether it's a DOS or WIN boot disk, a good one is a good disk.

The Chinese interface is very good.
But there is a problem: After exiting TW, the CD drive cannot be used. After DIR, it shows:
Volume in drive Q has no label
lnvalid function
Among them, Q is the CD drive.

This can be solved with LOCATE.COM... Please refer to my instant Chinese-hanized boot disk

Don't be anxious. There will soon be a new fully Chinese Windows 98 boot disk coming out!
The previous bugs will all be gone!
It's also more stable!
I don't know if you have found that after TW is loaded, sometimes there is screen flicker and the prompt menu doesn't appear. In fact, the prompt menu is still there, just a bug of TW.
But it won't appear in the new boot disk!
Also, do you feel that this boot disk is a bit slow? In the new disk, after a brand-new optimization, the speed has been improved a lot. Very obvious!

Dude, when will there be a new version of the boot to download? I've been waiting and waiting?? Hehe!