|
zengxibiao
初级用户
积分 137
发帖 8
注册 2004-10-11
状态 离线
|
『楼 主』:
[转贴]MaxDOS3.5-E,精简版.给装好的2K/XP/03加入纯DOS!
使用 LLM 解释/回答一下
以下为MaxDos 3.5-E 精简版
请有条件的同志帮试下精简版在SATA硬盘和SICS硬盘里运行程序会不会出错谢了。
MaxDOS 3.5-E 帮助文件！
2005年1月30日 Max-天 制作 QQ:12996688 网址 Http://Lyd.Xicp.Net
特别注意-启动密码为 : max (非什么广告或名气之类的东西,只是起个抛砖引玉而已)
本软件的用处.在装好的系统没有DOS的情况下为给装好的WINDOWS 2000/XP/2003装入纯DOS.支持NTFS分区
有问题请到这里 http://bbs.zhenfu.info 里提出.或在本贴里跟贴,请不要在QQ上问我..我不会回答的!
2.1版修正了可以在启动时查到密码
3.0修正了内核,有的朋友反应起动时当住了.或进菜单当住了.都修正了.
3.5修正了一下启动界面,太多人反应难看,加入了对NTFS分区的读写功能(但不能支持中文文件名和文件夹,不能对其进行操作),加入了DOS下刷BIOS程序,支持AMI和AWD,BIOS.和CBROM可以自己给BIOS加入OEM图片,加入了HDDREG,和HHDDSPEED(自动修复)都是比较出名的硬盘坏道修复程序.关于支持USB程序的.请到网上参阅DUSE.exe的使用方法.这里就不详说了.
3.5-E 简单说就是精简版,更新了GHOST为8.2版，加快了起动速度，去掉些没用的东西，还有大家所说我的广告太多，都已修正，修正了内核文件，只支持中文显示，支持NTFS分区GHOST，不支持NTFS分区操作文件！
本软件的特性:
1.支持进入纯DOS时自己设置密码.
2.支持网络刻隆.内置常见10种DOS网卡驱动.如下表:
3C90X 网卡
DCN530TX 网卡
DFE530TX 网卡
DLE530TX 网卡
IP 100 网卡
INTEL PRO100 网卡
RTL8029 网卡
RTL8139 网卡
SIS全系列 网卡
VIA全系列 网卡
本软件为绿色软件.绝对不会对系统造成破坏.更不会令系统不稳定..常见的软件已经集成.可见下表!
启动盘中所有文件列表
A 盘根目录下的文件
=================
文件名 功能
AUTOEXEC.BAT 系统启动批处理文件
COMMAND.COM MS-DOS 7.10的命令处理器，支持长文件名
CONFIG.SYS 系统启动配置文件
CTMOUSE.EXE CuteMouse 1.9版，DOS下最好最实用的鼠标驱动程序
DELDEV.COM 将用ADDEV加载的设备驱动程序从内存中删除，即取消那个驱动程序
DELTREE.COM 最强大实用的DELTREE替换程序1.02版
DEVICE.COM 在DOS命令行下直接加载设备驱动程序（如光驱驱动程序.SYS等）
Diskgen.exe DISKGEN2.0超强硬盘分区修复软件中文版(超级推荐,以前不会用FDISK都用这个)
DOSKEY.COM 最好的DOSKEY替代程序1.8版，提供命令历史、宏定义、自动完成等功能
DOSVER.COM 实用的设置DOS版本号的工具，可自动或手动设置DOS版本号
DREADY.COM 判断驱动器状态，例如检查光驱中是否有光盘、软盘是否写保护等
EXLAN.bat 用来解压网卡驱动包的，记住网刻前请选运行这个命令解压
GHOST GHOST8.2主程序
EMM386.EXE MS-DOS 7.10中自带的提供UMB和EMS内存的工具
ESCAPE.EXE 使在任何时候都可以按F12键返回DOS命令行下，以防止死机
EXTRACT.EXE 解压CAB压缩包的工具
FIND.COM 查找工具的最好的替代程序
FINDCD.EXE 自改的实用的查找光驱盘符的程序
FINDRAMD.EXE 实用的查找内存盘盘符的工具
HIMEM.SYS MS-DOS 7.10中自带的提供XMS内存的工具，支持大内存
IFSHLP.SYS 为Win9x提供增强的VFAT文件系统驱动支持（启动Win9x时必备）
IO.SYS MS-DOS 7.10的系统启动文件
KILLER.EXE 可以自动截获非法指令，以防止死机
LABEL.COM 非常小巧的修改磁盘卷标的工具
lan.cab 网刻DOS网卡驱动包,要网刻前请先行EXLAN解压出网卡驱动到虚拟盘里
LOOKBACK.DAT DISKGEN反KUI文件
max.cab 见下面有解
MOUSCLIP.EXE 很实用的在DOS下（包括命令行下）用鼠标复制/粘帖及模拟方向键的工具
MSDOS.SYS MS-DOS 7.10的系统启动配置文件
netgho1.bat 见下面说明
netgho2.BAT 简单的网刻批处理
NSET.COM 网刻NETGHO1.bat用到的文件
pctool.EXE 类拟于WIN的资源管理器
SHSUCDX.EXE 小巧实用的光驱扩展驱动程序最新版，是MSCDEX的最好替代品，只占很少内存
SORT.COM 非常小巧的排序工具
SPFDISK.EXE 启动管理器+分区管理器，功能强大
SUBST.EXE 非常小巧的设置虚拟驱动器的程序
TM.EXE 小巧实用的设置键盘和显示的工具
tw.exe 天汇中文程序,要显示中文请先运行这个!
UNDISK.EXE IMG等磁盘映象文件的解压工具
VIDE-CDD.SYS DOS下最好的通用IDE/ATAPI光驱驱动程序，只占很少的内存
WAIT.COM 用于批处理文件的等待工具，且支持键盘返回值等操作
Wattcp.cfg 网刻配置文件
WBAT.COM 非常强大实用的批处理对话框设计器，支持鼠标操作
Xcopy.EXE 用过的人都知道不用多说了!
XMSDSK.EXE 最好的虚拟内存盘工具，非常方便实用，且只占很少的内存
ZENO.EXE 很好的屏幕显示加速软件
MaxDos3.5-E说明文件.txt
等一系列文件,不一一说明了!
NETGHO1.bat 说明,用于网络刻隆的批处理文件
要网刻前请先行EXLAN解压出网卡驱动到虚拟盘里
@echo off
::生成3个随机数 要使用两个dos命令 random.com nset.com
::所以这两个文件不能删了
random 1 255|nset random1=$1
random 0 255|nset random2=$1
random 1 254|nset random3=$1
::把的得到的随机数写入 Wattcp.cfg 文件
echo IP=10.%random1%.%random2%.%random3%> Wattcp.cfg
::子网掩码不要修改
echo NETMASK=255.0.0.0>> Wattcp.cfg
::作服务器那台机子的IP 可以按需要修改,但必须为10.*.*.*
echo GATEWAY=10.1.1.1>> Wattcp.cfg
::删除临时变量
set random1=
set random2=
set random3=
::加载网卡驱动 要不要 -m 100full 看自己的情况了
8139 0x60
::开始自动网克服务器名aaa可按需要修改 (全盘克隆方式)
ghost -clone,mode=restore,src=@MCaaa,dst=1 -sure -rb
(以上是别人制作的,请跟据自己要求更改)
MAX.CAB压缩包中的文件：
-------------------------
ATTRIB.COM 强大实用的ATTRIB文件属性修改程序1.09版
BOOTPART.EXE 启动分区管理器2.50版，功能强大
CHKDSK.EXE MS-DOS 7.10中自带的命令行方式的磁盘检查工具
DEBUG.EXE MS-DOS 7.10中自带的调试程序，已修改让它支持汉字显示
EDIT.COM MS-DOS 7.10中自带的EDIT命令，可编辑多个大文件、文本/二进制文件
FAKEDISK.COM 将各种软盘镜像（如IMG、DDI等）虚拟成软盘的工具
FDISK.EXE MS-DOS 7.10中自带的硬盘分区工具，支持大硬盘和各种分区
FORMAT.EXE MS-DOS 7.10中自带的格式化程序
MEM.EXE DOS下的内存信息查看工具
MORE.COM MS-DOS 7.10中自带的分屏显示工具
REGEDIT.EXE MS-DOS 7.10中自带的Windows注册表维护工具
SMARTDRV.EXE MS-DOS 7.10中自带的磁盘高速缓冲程序
SRCBOOT.COM 命令行方式的保存/恢复/比较磁盘的启动扇区的小工具
SRCFAT.COM 命令行方式的保存/恢复/比较磁盘的文件分配表（FAT）的小工具
SRCMBR.COM 命令行方式的保存/恢复/比较磁盘的主引导记录（MBR）的小工具
SYS.COM MS-DOS 7.10中自带的DOS系统文件传输程序
TREE.COM DOS自带的用文本图形方式查看文件夹树的工具
特别注意!
启动菜单的默认密码为: max
如果要修改密码请用记事本打开 C:\BOOT\GRUB\menu.lst ( 必须先去掉系统文件保护,和隐藏文件---打开 {{我的电脑->工具->文件夹选项->隐藏受保护的操作系统文件,的勾去掉->显示所有文件和文件夹,的选定}} ) 在PASSWORD行后的MAX改为你要的密码.记住中间有一个空格.还有C盘里的BOOT目录不能删除.一删除本软件就无法运行.还有本软件只支持系统装在C盘.也就是硬盘的第一个分区.
关于卸载软件请看这里．
要卸载本软件,请手工卸载,因为安装程序没办法去掉启动选项,所以请手工卸载, 删除掉 C:\BOOT 文件夹,用记事本打 C:\BOOT.INI( 必须先去掉系统文件保护,和隐藏文件---打开 {{我的电脑->工具->文件夹选项->隐藏受保护的操作系统文件,的勾去掉->显示所有文件和文件夹,的选定}} ) 把BOOT.INI的只读属性去掉, 把 timeout=5 的5改为你想要的等待时间.把最后一行删除就行了
精简版下载地址: Http://61.131.56.166/soft/dose.rar
另: 附送网络GHOST服务端.DOS服务端和WIN服务端.下载地址: http://amoi.nckd.com/liiang/gho.rar
2005年1月30日 Max-天 制作 QQ:12996688 网址 Http://Lyd.Xicp.Net
The following is the MaxDos 3.5-E streamlined version.
Please, comrades with conditions, help test whether there will be errors when running programs in the streamlined version on SATA hard disks and SICS hard disks. Thanks.
MaxDOS 3.5-E Help File!
Produced by Max-Tian on January 30, 2005. QQ: 12996688. Website: Http://Lyd.Xicp.Net
Special note - The boot password is: max (It's not for advertisement or fame, just to serve as a starting point).
The use of this software: When there is no DOS in the installed system, to install pure DOS into the installed WINDOWS 2000/XP/2003. It supports NTFS partitions.
If you have any questions, please post them at http://bbs.zhenfu.info or post a reply in this thread. Please don't ask me on QQ.. I won't answer.
Version 2.1 corrected that the password can be found during startup.
Version 3.0 corrected the kernel. Some friends reported that it got stuck during startup or when entering the menu. All have been corrected.
Version 3.5 corrected the startup interface. Too many people reported it was ugly. Added read-write functions for NTFS partitions (but cannot support Chinese file names and folders, and cannot operate on them). Added a BIOS flashing program under DOS. Supports AMI and AWD BIOS. CBROM can add OEM pictures to BIOS by yourself. Added HDDREG and HHDDSPEED (automatic repair), both are relatively famous hard disk bad sector repair programs. Regarding the support for USB programs, please refer to the usage method of DUSE.exe on the Internet. It won't be explained in detail here.
3.5-E Simply put, it's a streamlined version. Updated GHOST to version 8.2, speeded up the startup speed, removed some useless things. Also, everyone said there were too many advertisements from me, all have been corrected. Corrected the kernel file. Only supports Chinese display. Supports NTFS partition GHOST. Does not support operating files on NTFS partitions!
Characteristics of this software:
1. Supports setting the password by yourself when entering pure DOS.
2. Supports network cloning. Built-in 10 common DOS network card drivers. As follows:
3C90X network card
DCN530TX network card
DFE530TX network card
DLE530TX network card
IP 100 network card
INTEL PRO100 network card
RTL8029 network card
RTL8139 network card
SIS series network cards
VIA series network cards
This software is a green software. It will absolutely not cause damage to the system. Nor will it make the system unstable.. Common software has been integrated. See the following table!
All files list on the boot disk
Files in the root directory of drive A
=================
File name Function
AUTOEXEC.BAT System startup batch processing file
COMMAND.COM MS-DOS 7.10 command processor, supports long file names
CONFIG.SYS System startup configuration file
CTMOUSE.EXE CuteMouse 1.9 version, the best and most practical mouse driver under DOS
DELDEV.COM Delete the device driver program loaded by ADDEV from memory, that is, cancel that driver program
DELTREE.COM The most powerful and practical DELTREE replacement program version 1.02
DEVICE.COM Directly load device driver programs (such as CD-ROM driver programs.SYS, etc.) under the DOS command line
Diskgen.exe DISKGEN2.0 super strong hard disk partition repair software Chinese version (super recommended, I used this before I didn't know how to use FDISK)
DOSKEY.COM The best DOSKEY replacement program version 1.8, provides command history, macro definition, automatic completion and other functions
DOSVER.COM Practical tool to set DOS version number, can automatically or manually set DOS version number
DREADY.COM Judge drive status, for example, check whether there is a CD in the CD-ROM, whether the floppy disk is write-protected, etc.
EXLAN.bat Used to decompress the network card driver package. Remember to run this command to decompress before network cloning
GHOST GHOST8.2 main program
EMM386.EXE The tool provided by MS-DOS 7.10 to provide UMB and EMS memory
ESCAPE.EXE Allows returning to the DOS command line at any time by pressing the F12 key to prevent system crash
EXTRACT.EXE Tool to decompress CAB compressed package
FIND.COM The best replacement program for the search tool
FINDCD.EXE Self-modified practical program to find CD-ROM drive letter
FINDRAMD.EXE Practical tool to find RAM disk drive letter
HIMEM.SYS The tool provided by MS-DOS 7.10 to provide XMS memory, supports large memory
IFSHLP.SYS Provide enhanced VFAT file system driver support for Win9x (required when starting Win9x)
IO.SYS MS-DOS 7.10 system startup file
KILLER.EXE Can automatically intercept illegal instructions to prevent system crash
LABEL.COM Very small tool to modify disk volume label
lan.cab Network cloning DOS network card driver package, please decompress the network card driver to the virtual disk by running EXLAN before network cloning
LOOKBACK.DAT DISKGEN anti-KUI file
max.cab See below for decompression
MOUSCLIP.EXE Very practical tool to copy/paste with mouse and simulate arrow keys under DOS (including command line)
MSDOS.SYS MS-DOS 7.10 system startup configuration file
netgho1.bat See below instructions
netgho2.BAT Simple network cloning batch processing
NSET.COM File used by netgho1.bat for network cloning
pctool.EXE Similar to Windows resource manager
SHSUCDX.EXE Compact and practical CD-ROM expansion driver program latest version, the best substitute for MSCDEX, only occupies very little memory
SORT.COM Very small sorting tool
SPFDISK.EXE Boot manager + partition manager, powerful functions
SUBST.EXE Very small tool to set virtual drive
TM.EXE Compact and practical tool to set keyboard and display
tw.exe Tianhui Chinese program, please run this first if you want to display Chinese!
UNDISK.EXE Tool to decompress disk image files such as IMG
VIDE-CDD.SYS The best universal IDE/ATAPI CD-ROM driver under DOS, only occupies very little memory
WAIT.COM Wait tool for batch processing files, and supports keyboard return value and other operations
Wattcp.cfg Network cloning configuration file
WBAT.COM Very powerful and practical batch processing dialog box designer, supports mouse operation
Xcopy.EXE Everyone who has used it knows, no need to say more!
XMSDSK.EXE The best virtual memory disk tool, very convenient and practical, and only occupies very little memory
ZENO.EXE Very good screen display acceleration software
MaxDos3.5-E Instructions.txt
And a series of files, not all explained one by one!
Instructions for netgho1.bat, batch processing file for network cloning
Please decompress the network card driver to the virtual disk by running EXLAN before network cloning
@echo off
:: Generate 3 random numbers. Need to use two DOS commands random.com nset.com
:: So these two files cannot be deleted
random 1 255|nset random1=$1
random 0 255|nset random2=$1
random 1 254|nset random3=$1
:: Write the obtained random numbers into the Wattcp.cfg file
echo IP=10.%random1%.%random2%.%random3%> Wattcp.cfg
:: Do not modify the subnet mask
echo NETMASK=255.0.0.0>> Wattcp.cfg
:: IP of the server machine, can be modified as needed, but must be 10.*.*.*
echo GATEWAY=10.1.1.1>> Wattcp.cfg
:: Delete temporary variables
set random1=
set random2=
set random3=
:: Load network card driver. Whether to use -m 100full depends on your own situation
8139 0x60
:: Start automatic network cloning. Server name aaa can be modified as needed (full disk cloning mode)
ghost -clone,mode=restore,src=@MCaaa,dst=1 -sure -rb
(The above is made by others, please change according to your own requirements)
Files in the MAX.CAB compressed package:
-------------------------
ATTRIB.COM Powerful and practical ATTRIB file attribute modification program version 1.09
BOOTPART.EXE Boot partition manager version 2.50, powerful functions
CHKDSK.EXE The command line disk check tool provided by MS-DOS 7.10
DEBUG.EXE The debugging program provided by MS-DOS 7.10, which has been modified to support Chinese display
EDIT.COM The EDIT command provided by MS-DOS 7.10, can edit multiple large files, text/binary files
FAKEDISK.COM Tool to virtualize various floppy disk images (such as IMG, DDI, etc.) into floppy disks
FDISK.EXE The hard disk partition tool provided by MS-DOS 7.10, supports large hard disks and various partitions
FORMAT.EXE The formatting program provided by MS-DOS 7.10
MEM.EXE Memory information viewing tool under DOS
MORE.COM The paging display tool provided by MS-DOS 7.10
REGEDIT.EXE The Windows registry maintenance tool provided by MS-DOS 7.10
SMARTDRV.EXE The disk cache program provided by MS-DOS 7.10
SRCBOOT.COM Small tool to save/restore/compare the boot sector of the disk in command line mode
SRCFAT.COM Small tool to save/restore/compare the file allocation table (FAT) of the disk in command line mode
SRCMBR.COM Small tool to save/restore/compare the master boot record (MBR) of the disk in command line mode
SYS.COM The DOS system file transmission program provided by MS-DOS 7.10
TREE.COM The tool to view the folder tree in text graphics mode provided by DOS
Special note!
The default password of the startup menu is: max
If you want to modify the password, please open C:\BOOT\GRUB\menu.lst with Notepad (must first remove the system file protection and hidden files---open {{My Computer->Tools->Folder Options->Remove the check mark of Hide protected operating system files->Select Show all files and folders}}) Change MAX after the PASSWORD line to the password you want. Remember there is a space in the middle. Also, the BOOT directory on drive C cannot be deleted. Once deleted, this software cannot run. Also, this software only supports the system installed on drive C, that is, the first partition of the hard disk.
For uninstalling the software, please refer to here.
To uninstall this software, please uninstall manually. Because the installation program cannot remove the startup option, so please uninstall manually. Delete the C:\BOOT folder. Open C:\BOOT.INI with Notepad (must first remove the system file protection and hidden files---open {{My Computer->Tools->Folder Options->Remove the check mark of Hide protected operating system files->Select Show all files and folders}}) Remove the read-only attribute of BOOT.INI. Change timeout=5 to the waiting time you want. Delete the last line.
Download address of the streamlined version: Http://61.131.56.166/soft/dose.rar
Also: Attached with network GHOST server side, DOS server side and WIN server side. Download address: http://amoi.nckd.com/liiang/gho.rar
Produced by Max-Tian on January 30, 2005. QQ: 12996688. Website: Http://Lyd.Xicp.Net
|
|
 2005-3-16 00:00 |
|
|
zengxibiao
初级用户
积分 137
发帖 8
注册 2004-10-11
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
以下为MaxDos 3.5为加强版
MaxDOS 3.5 帮助文件！
经过测试！！！本软件对 SATA和SCIS 硬盘的支持性差。可能存在问题！！待修正!!
收集DOS网卡驱动,用于更新MaxDos,请大家支持支持~
我现在手头上已有以下网卡驱动，如果谁手头上还有下列没有的。请上到论坛来，或者上传到我FTP里来，上传了的请跟贴说明，谢谢, FTP地址 ftp://max1:552@61.131.56.166
3C90X 网卡
DCN530TX 网卡
DFE530TX 网卡
DLE530TX 网卡
IC Plus IP100 网卡
INTEL PRO100 网卡
RTL8029 网卡
RTL8139 网卡
SIS900 网卡
VIAVIA Rhine Family Fast I 网卡
特别注意:启动密码为 : max
本软件的用处为,给装好的WIN2K/XP/2003加入纯DOS!!
这个有可能是最终版了..因为比较没时间.应该也没什么错误了.如果还有什么大错误再说吧..有问题请到这里 http://bbs.zhenfu.info 里提出.或在本贴里跟贴,请不要在QQ上问我..我不会回答的!
2.1版修正了可以在启动时查到密码
3.0修正了内核,有的朋友反应起动时当住了.或进菜单当住了.都修正了.
3.5修正了一下启动界面,太多人反应难看,加入了对NTFS分区的读写功能(但不能支持中文文件名和文件夹,不能对其进行操作),加入了DOS下刷BIOS程序,支持AMI和AWD,BIOS.和CBROM可以自己给BIOS加入OEM图片,加入了HDDREG,和HHDDSPEED(自动修复)都是比较出名的硬盘坏道修复程序.关于支持USB程序的.请到网上参阅DUSE.exe的使用方法.这里就不详说了.
本软件的特性:
1.支持NTFS分区.支持系统盘为NTFS.支持NTFS分区读写.
2.支持长文件名.支持中文长文件名.
3.支持支持全中文.支持中文显示.中文五笔输入.拼音输入.
4.内置的软件大多为中文版本.大部分也汉化.
5.支持进入纯DOS时自己设置密码.
6.支持网络刻隆.内置常见10种DOS网卡驱动.如下表:
3C90X 网卡
DCN530TX 网卡
DFE530TX 网卡
DLE530TX 网卡
IP 100 网卡
INTEL PRO100 网卡
RTL8029 网卡
RTL8139 网卡
SIS全系列 网卡
VIA全系列 网卡
本软件为绿色软件.绝对不会对系统造成破坏.更不会令系统不稳定..至于有人说软件太多是傀儡.我不认为.因为总会有用到的时候.而且再大整个软件也才 8M多一点.如果要自己添加或删除里面的组件的话.我想就没必要了.常见的软件已经集成.可见下表!
启动盘中所有文件列表
A 盘根目录下的文件
=================
文件名 功能
AMIFLASH.exe AMIBIOS刷新程序
AWDFLASH.EXE AWDBIOS刷新程序
CBROM.EXE 修改BIOS的LOGO信息和图片
HDDREGCN.EXE HDDREG 1.32 中文版,硬盘坏道修复程序
HDDREGEN.EXE HDDREG 1.41 英文版,硬盘坏道修复程序
RAR.exe DOS版本WINRAR3.41最新版,可用 RAR E NAME.RAR 解压缩运行前请选运行RUNRAR.解压出两个压缩软件)
ZIP.exe DOS版本ZIP文件压缩软件,可用 ZIP E NAME.ZIP 解压缩 (运行前请选运行RUNRAR.解压出两个压缩软件)
DM.BAT DM9.56中文版 这个应该不用我介绍了吧..
DISKGEN.BAT 大名顶顶的 DISKGEN 2.0 强大的中文分区,修复软件
GHOST.EXE GHOST 8.0 企业版,不用我说了吧.
PCTOOL.EXE 类似于WINDOWS的资源管理器.可更名,更文件夹,查找等.
WBX.EXE 五笔输入法载入程序
PY.EXE 拼音输入法程序
SPFDISK 中文分区软件.应该有用过吧.不错.
Temp 临时文件夹
Cfg Mhdd的历史记录文件夹
Attrib.exe 添加或删除文件属性
Autoexec.bat 启动批处理加载文件
Cmos.exe CMOS 密码破解程序
Command.com 命令解释程序
Config.sys 启动配置文件
Deltree.com 文件夹删除程序
Doskey.com DOS 宏命令编译器
Doslfn.com DOS 长文件名驱动
Ebd.cab 包含汉字系统的的 Cab 压缩包
Ebd.sys 标识 ESD 的文件
Emm386.exe MS-DOS 7.10中自带的提供UMB和EMS内存的工具
Extract.exe 微软 CAB 压缩文件解压程序
Fbdisk.exe 坏盘修复程序1.1版
Findcd.exe 光驱盘符识别程序
Findramd.exe RAMDrive 盘符识别程序
Hd-copy.exe 磁盘复制程序 2.0a 版
Hdd21.com 三茗硬盘医生 V2.1 版
Himem.sys XMS 内存管理程序
Ifshlp.sys 增强的文件管理驱动程序，为 Win9x 提供 VFAT 文件系统支持
Io.sys 优化的无 Logo 防硬盘逻辑锁系统核心文件
Jmhd.exe 江民硬盘修复王 8.0 版
Low.exe 硬盘低级格式化程序
Mhdd.exe 通用硬盘物理修复程序
Mouse.exe 鼠标驱动程序 CtMouse 1.9版
Msdos.sys 引导选项信息
Qconvert.exe 快速格式软盘转换程序
Qcopy.exe 软盘加速，软盘复制程序
Qformat.exe 快速格式软盘格式化程序
Readntfs.exe 图形化 NTFS 格式分区游览程序
Shsucdx.exe 光驱扩展驱动程序
Smartdrv.exe 磁盘高速缓存
Spfdisk.exe 硬盘分区修复软件
Xcopy.exe 高级文件复制程序
Xmsdsk.exe 虚拟内存盘创建程序
Debug.exe 调试实用程序
Edit.com 实模式的中文紧急文本编辑器
Ext.exe CAB 文件解压程序 Extract.exe 的外壳程序
Fdisk.exe WinMe 的中文磁盘分区工具
Format.com oformat.com 快速磁盘格式化工具
Regedit.exe Win9x 的注册表修复软件
Choice.com 选择命令,执行后将提示可选择的项目
Cp936uni.tbl DOSLFN 0.32o 的简体中文代码页
CTLOAD.COM 在 DOS 命令行下直接加载设备驱动程序
Debug.bat Debug.exe 解压运行批处理文件
Dosver.com DOS 版本自由设定程序
Escape.exe 死机强行推出程序
Fdisk.bat Fdisk.exe 解压运行批处理文件
Format.bat format.com 解压运行批处理文件
Help.bat 帮助的批处理文件
Key.com 中文输入法安装程序
Killer.exe 防死机克星
Regedit.bat Regedit.exe 解压运行批处理文件
Tw.exe 天汇中文系统 3.2 版
等一系列文件,不一一说明了!
特别注意!
启动菜单的默认密码为: max
如果要修改密码请用记事本打开 C:\BOOT\GRUB\menu.lst ( 必须先去掉系统文件保护,和隐藏文件---打开 {{我的电脑->工具->文件夹选项->隐藏受保护的操作系统文件,的勾去掉->显示所有文件和文件夹,的选定}} ) 在PASSWORD行后的MAX改为你要的密码.记住中间有一个空格.还有C盘里的BOOT目录不能删除.一删除本软件就无法运行.还有本软件只支持系统装在C盘.也就是硬盘的第一个分区.
关于卸载软件请看这里．
要卸载本软件,请手工卸载,因为安装程序没办法去掉启动选项,所以请手工卸载, 删除掉 C:\BOOT 文件夹,用记事本打 C:\BOOT.INI( 必须先去掉系统文件保护,和隐藏文件---打开 {{我的电脑->工具->文件夹选项->隐藏受保护的操作系统文件,的勾去掉->显示所有文件和文件夹,的选定}} ) 把BOOT.INI的只读属性去掉, 把 timeout=5 的5改为你想要的等待时间.把最后一行删除就行了
加强版下载地址: Http://61.131.56.166/soft/dos.rar
另: 附送网络GHOST服务端.DOS服务端和WIN服务端.下载地址: http://amoi.nckd.com/liiang/gho.rar
2004年11月12日 Max-天 制作 QQ:12996688 网址 Http://Lyd.Xicp.Net
MaxDos 3.5 is an enhanced version
MaxDos 3.5 Help File!
After testing!!! This software has poor support for SATA and SCIS hard drives. There may be problems! To be corrected!!
Collect DOS network card drivers to update MaxDos, please support~
I currently have the following network card drivers. If anyone has the ones not listed below, please come to the forum or upload to my FTP. Please post to indicate after uploading. Thank you. FTP address: ftp://max1:552@61.131.56.166
3C90X network card
DCN530TX network card
DFE530TX network card
DLE530TX network card
IC Plus IP100 network card
INTEL PRO100 network card
RTL8029 network card
RTL8139 network card
SIS900 network card
VIAVIA Rhine Family Fast I network card
Special note: The boot password is: max
The use of this software is to add pure DOS to the installed WIN2K/XP/2003!!
This may be the final version.. Because I have less time. There should be no major errors. If there are any major errors, please let me know. If you have any questions, please go to http://bbs.zhenfu.info to post or post in this thread. Please don't ask me on QQ.. I won't answer!
Version 2.1 corrected that the password can be found during startup
Version 3.0 corrected the kernel. Some friends reported that it was stuck during startup or in the menu. All were corrected.
Version 3.5 corrected the startup interface. Too many people reported it was ugly. Added read-write function for NTFS partitions (but cannot support Chinese file names and folders, cannot operate on them). Added BIOS flashing program under DOS, supports AMI and AWD BIOS. CBROM can add OEM pictures to BIOS. Added HDDREG and HHDDSPEED (automatic repair), both are well-known hard disk bad sector repair programs. For USB program support, please refer to the usage method of DUSE.exe on the Internet. It will not be detailed here.
Characteristics of this software:
1. Supports NTFS partitions. Supports the system disk as NTFS. Supports NTFS partition reading and writing.
2. Supports long file names. Supports Chinese long file names.
3. Supports full Chinese. Supports Chinese display. Chinese Wubi input. Pinyin input.
4. Most of the built-in software are Chinese versions. Most are also localized.
5. Supports setting password when entering pure DOS.
6. Supports network cloning. Built-in 10 common DOS network card drivers. As follows:
3C90X network card
DCN530TX network card
DFE530TX network card
DLE530TX network card
IP 100 network card
INTEL PRO100 network card
RTL8029 network card
RTL8139 network card
SIS series network cards
VIA series network cards
This software is a green software. It will not damage the system. It will not make the system unstable.. As for someone saying that there are too many puppet software, I don't think so. Because there will always be times when it is needed. And even if it is large, the entire software is only more than 8M. If you want to add or delete components inside, I think it is unnecessary. Common software has been integrated. See the list below!
List of all files on the boot disk
Files in the root directory of drive A
=================
File name Function
AMIFLASH.exe AMIBIOS flashing program
AWDFLASH.EXE AWDBIOS flashing program
CBROM.EXE Modify BIOS logo information and pictures
HDDREGCN.EXE HDDREG 1.32 Chinese version, hard disk bad sector repair program
HDDREGEN.EXE HDDREG 1.41 English version, hard disk bad sector repair program
RAR.exe DOS version WINRAR3.41 latest version, can use RAR E NAME.RAR to decompress. Please select RUNRAR to run before running. Decompress two compression software)
ZIP.exe DOS version ZIP file compression software, can use ZIP E NAME.ZIP to decompress (Please select RUNRAR to run before running. Decompress two compression software)
DM.BAT DM9.56 Chinese version I don't need to introduce this, right..
DISKGEN.BAT The famous DISKGEN 2.0 powerful Chinese partition, repair software
GHOST.EXE GHOST 8.0 enterprise version, no need to introduce it.
PCTOOL.EXE Similar to the resource manager of WINDOWS. Can rename, change folders, search, etc.
WBX.EXE Wubi input method loading program
PY.EXE Pinyin input method program
SPFDISK Chinese partition software. Should have used it.不错.
Temp Temporary folder
Cfg History record folder of Mhdd
Attrib.exe Add or delete file attributes
Autoexec.bat Startup batch loading file
Cmos.exe CMOS password cracking program
Command.com Command interpreter
Config.sys Startup configuration file
Deltree.com Folder deletion program
Doskey.com DOS macro command compiler
Doslfn.com DOS long file name driver
Ebd.cab Cab compressed package containing Chinese system
Ebd.sys File identifying ESD
Emm386.exe Tool provided by MS-DOS 7.10 to provide UMB and EMS memory
Extract.exe Microsoft CAB compressed file decompression program
Fbdisk.exe Bad disk repair program version 1.1
Findcd.exe CD-ROM drive letter identification program
Findramd.exe RAMDrive drive letter identification program
Hd-copy.exe Disk copying program version 2.0a
Hdd21.com Sanming Hard Disk Doctor V2.1 version
Himem.sys XMS memory management program
Ifshlp.sys Enhanced file management driver, providing VFAT file system support for Win9x
Io.sys Optimized logo-free anti-hard disk logical lock system core file
Jmhd.exe Jiangmin Hard Disk Repair King version 8.0
Low.exe Hard disk low-level formatting program
Mhdd.exe General hard disk physical repair program
Mouse.exe Mouse driver program CtMouse version 1.9
Msdos.sys Boot option information
Qconvert.exe Quick format floppy disk conversion program
Qcopy.exe Floppy disk acceleration, floppy disk copying program
Qformat.exe Quick format floppy disk formatting program
Readntfs.exe Graphical NTFS partition browsing program
Shsucdx.exe CD-ROM drive extension driver
Smartdrv.exe Disk cache
Spfdisk.exe Hard disk partition repair software
Xcopy.exe Advanced file copying program
Xmsdsk.exe Virtual memory disk creation program
Debug.exe Debug utility
Edit.com Real-mode Chinese emergency text editor
Ext.exe Shell program of CAB file decompression program Extract.exe
Fdisk.exe WinMe Chinese disk partition tool
Format.com oformat.com quick disk formatting tool
Regedit.exe Win9x registry repair software
Choice.com Choice command, after execution, it will prompt selectable items
Cp936uni.tbl DOSLFN 0.32o simplified Chinese code page
CTLOAD.COM Directly load device driver under DOS command line
Debug.bat Debug.exe decompression running batch file
Dosver.com DOS version free setting program
Escape.exe Force exit program when stuck
Fdisk.bat Fdisk.exe decompression running batch file
Format.bat format.com decompression running batch file
Help.bat Help batch file
Key.com Chinese input method installation program
Killer.exe Anti-stuck killer
Regedit.bat Regedit.exe decompression running batch file
Tw.exe Tianhui Chinese system version 3.2
And a series of files, not listed one by one!
Special note!
The default password of the startup menu is: max
If you want to modify the password, please use Notepad to open C:\BOOT\GRUB\menu.lst (you must first remove the system file protection and hidden files---open {{My Computer->Tools->Folder Options->Remove the checkmark for Hide protected operating system files->Select Show all files and folders}}) Change MAX after the PASSWORD line to the password you want. Remember there is a space in the middle. Also, the BOOT directory on drive C cannot be deleted. Once deleted, this software will not run. Also, this software only supports the system installed on drive C. That is, the first partition of the hard disk.
For uninstalling the software, please see here.
To uninstall this software, please uninstall manually, because the installation program cannot remove the startup option. So please uninstall manually. Delete the C:\BOOT folder. Use Notepad to open C:\BOOT.INI (you must first remove the system file protection and hidden files---open {{My Computer->Tools->Folder Options->Remove the checkmark for Hide protected operating system files->Select Show all files and folders}}) Remove the read-only attribute of BOOT.INI. Change timeout=5 to the waiting time you want. Delete the last line.
Enhanced version download address: Http://61.131.56.166/soft/dos.rar
In addition:附送 network GHOST server. DOS server and WIN server. Download address: http://amoi.nckd.com/liiang/gho.rar
Made by Max-Tian on November 12, 2004 QQ:12996688 Website Http://Lyd.Xicp.Net
|
|
|
2005-3-16 00:00 |
|
|
