|
恋网物语
初级用户
积分 138
发帖 10
注册 2005-4-5
来自 黑龙江省
状态 离线
|
『楼 主』:
[求助]U盘启动DOS,识别USB硬盘解决方案!
使用 LLM 解释/回答一下
我用U盘启动后加载
device=USBASPI.SYS /e /v /w
device=aspidisk.sys
来识别我的USB硬盘,可到usbaspi之后问题就出来了,USBaspi运行之后(原来的U是C盘),就找不到U盘上的内容了,U盘的东西在DOS下都变乱码了,然后就找不到aspidisk.sys文件,也找不到command.com了!
我想是由于Usbaspi.sys重新识别了U盘的原因,使原来主板识别的U盘不正常,与是我就用Grub的内存盘调用U盘上的IMG文件来加载USBASPI和ASPIDisk,这样就正常了,但加载之后C盘也就是U盘还是不能用,U盘被重新分配了别的盘符,不知道还有别的解决办法吗?
After booting with the USB flash drive, I loaded
device=USBASPI.SYS /e /v /w
device=aspidisk.sys
to identify my USB hard drive. But after the usbaspi, the problem came up. After USBaspi ran (the original U was the C drive), I couldn't find the contents on the USB flash drive. The things on the USB flash drive became garbled in DOS, and then I couldn't find the aspidisk.sys file or the command.com!
I think it was because Usbaspi.sys re - identified the USB flash drive, making the USB flash drive recognized normally by the original motherboard abnormally. So I used the memory disk of Grub to call the IMG file on the USB flash drive to load USBASPI and ASPIDisk, and it was normal then. But after loading, the C drive, which was the USB flash drive, still couldn't be used. The USB flash drive was assigned another drive letter. I wonder if there are other solutions?
|
|
 2005-4-27 00:00 |
|
|
恋网物语
初级用户
积分 138
发帖 10
注册 2005-4-5
来自 黑龙江省
状态 离线
|
『第 2 楼』:
使用 LLM 解释/回答一下
另外ISOEMU 1.09为什么在我的移动硬盘上调用不了ISO文件呢?我的移动硬盘是FAT32的!
Also, why can't ISOEMU 1.09 call ISO files on my external hard drive? My external hard drive is FAT32!
|
|
|
2005-4-27 00:00 |
|
|
o2y
中级用户
积分 226
发帖 51
注册 2004-4-16
状态 离线
|
『第 3 楼』:
使用 LLM 解释/回答一下
楼主的问题我也遇到过，我想可行的解决办法：主板支持USB启动的话就不要再加载新的USB驱动了。
I have encountered the problem mentioned by the post owner. I think a feasible solution is: if the motherboard supports USB boot, then do not load new USB drivers.
|
|
|
2005-4-28 00:00 |
|
|
Wengier
系统支持
“新DOS时代”站长
积分 27736
发帖 10521
注册 2002-10-9
状态 离线
|
『第 4 楼』:
使用 LLM 解释/回答一下
同意樓上的說法。ISOEMU目前是不支持USB硬盤的，所以當然無法識別USB硬盤上的FAT32分區！
Agree with the statement above. ISOEMU currently does not support USB hard drives, so it naturally cannot recognize the FAT32 partitions on USB hard drives!
|
Wengier - 新DOS时代
欢迎大家来到我的“新DOS时代”网站，里面有各类DOS软件和资料，地址：
http://wendos.mycool.net/
E-Mail & MSN: wengierwu AT hotmail.com （最近比较忙，有事请联系DOSroot和雨露，谢谢！）
 |
|
|
2005-4-28 00:00 |
|
|
恋网物语
初级用户
积分 138
发帖 10
注册 2005-4-5
来自 黑龙江省
状态 离线
|
『第 5 楼』:
使用 LLM 解释/回答一下
可是我的主板不支持USB的HDD啊,所以看不到我的移动硬盘,只能看到U盘
But my motherboard doesn't support USB HDD, so I can't see my external hard drive, only the USB flash drive.
|
|
|
2005-4-28 00:00 |
|
|
derQiQ
初级用户
积分 129
发帖 10
注册 2004-7-22
状态 离线
|
『第 6 楼』:
使用 LLM 解释/回答一下
只是个想法，把COMMAND.com解释命令由USB所在盘符转移到RAM-DISK所在符上，而且该RAM-DISK存有所须的USB驱动和工具，然后手工加载USB驱动，前提是，RAM-DISK，内容不被丢失。
Just a thought: transfer the command interpretation command of COMMAND.com from the USB - located drive letter to the RAM - DISK - located drive letter, and the RAM - DISK stores the required USB drivers and tools, then manually load the USB drivers. The premise is that the content of the RAM - DISK is not lost.
|
|
|
2005-4-28 00:00 |
|
|
gmy
版主
操作系统爱好者
积分 1113
发帖 392
注册 2002-11-11
状态 离线
|
『第 7 楼』:
使用 LLM 解释/回答一下
USBoot的作者在它的 PDF 文档里说过：关键在于BIOS，多数主板BIOS里的USB-FDD USB-HDD USB-ZIP 都 形同虚设，根本不检测U盘。本人有3台电脑和3个U盘，只有1台电脑支持USB-ZIP且只认32M的。
The author of USBoot said in its PDF document: The key is the BIOS. The USB-FDD, USB-HDD, USB-ZIP in most motherboard BIOSes are all in name only, and simply do not detect the USB flash drive. I have 3 computers and 3 USB flash drives. Only 1 computer supports USB-ZIP and only recognizes 32M.
|
DOS之家 http://doshome.com 站长 葛明阳 |
|
|
2005-4-29 00:00 |
|
