『楼 主』:
我的超级U盘系统已经做好
使用 LLM 解释/回答一下
我的U盘系统盘已经做好，现还在进行最后的测试，先在这里做个简要介绍。
这是我制作的一个集系统维护、DOS下使用局域网和因特网、DOS下的多媒体、WINXPE、GEEXBOX、FANX的全功能优盘，有许多特色，简要介绍如下：
本优盘是USB_ZIP启动模式，提示符为a:。
根目录下的文件除了txt文件外，其他的都不能删除。
根目录下DOS目录中是启动时会用到的一些程序。
根目录中另一个目录就是BOOT，所有的工具都集中在里面：
encrypt.exe，运行他，会提示输入一个密码，这个程序会修改password.sys，以后你启动DOS时会要求你输入前面的那个密码。不要忘记了，但真要忘了，在XP下再运行一次encrypt.exe，再输入一个就行了。
BOOT下其他的程序都很常用，这里不作介绍。
BOOT下的目录：
其下有另一个BOOT目录，这里有MSDOS下启动，即用autoexec.bat及config.sys启动时要用到的一些，如win32，win98,矮人的DOS工具 ，FANX，局域网(只支持我的8139网卡，要用其他的做点修改就行了，网卡驱动到\BOOT\NET\PACKET里找。里面有很多是源程序，只有com或exe文件才是要用的驱动，这里还没做整理)。
CAI目录，是DOS下的TT和WT，练英文和五笔输入法的程序，读书时用过，所以收藏在此。
cmosmenu目录，修改和备份CMOS的工具。
disktool目录，里面有一些恢复数据和修复硬盘的程序，大名鼎鼎的DM和磁盘精灵DISKGEN，PQMAGIC(7.0的版本，有点低)也放在这里。
drv目录，是DOS常用的驱动，有USB，NTFSPRO，IFS、IEEE1394以及笔记本电脑上的PC卡驱动。
ext目录，是一些DOS扩展程序，有汉字系统TW，中国龙，WPS，还有程序管理器seal2,dn,,nc,vc等。
ghost目录，包括8.3版和11版的，如果你从不用11版，可以删除。
grub目录，是启动引导工具，里面有一个BOOT目录，用GRUB启动的一些IMG文件和GEEXBOX放在这里。
media目录，里面包括很多多媒体工具，全是网上收集的，感谢中国DOS联盟和新DOS时代网站。
net目录，包括上因特网和局域网中使用的大量工具，以及DOS下网卡的可执行驱动程序。
以上就简单的作这些介绍。
这个优盘版的内容很多，所以得要一个512M的优盘，如果觉得大了，可以去掉FANX或GEEXBOX，分别删除\BOOT\BOOT\FANX和\BOOT\GRUB\BOOT\GEEXBOX，然后修改根目录下的menu.lst与autoexec.bat、config.sys里的相应入口即可，这样最后就可以放在256M盘中。如果你只要用一用FANX或GEEXBOX，那更简单，FANX可以直接在DOS下用loadin启动，把它加到autoexec.bat中就行，GEEXBOX用grub启动，启动参数参照根目录中menu.lst即可。
希望大家喜欢我做的这个“玩具”。
闵成安
2007年6月
My USB system disk has been made and is now undergoing final testing. Here's a brief introduction first.
This is a full-function USB flash drive I made that integrates system maintenance, LAN and Internet use under DOS, multimedia under DOS, WINXPE, GEEXBOX, and FANX. There are many features, briefly introduced as follows:
This USB flash drive is in USB_ZIP boot mode, with the prompt being a:.
Except for txt files, no other files in the root directory can be deleted.
The DOS directory in the root directory contains some programs used during startup.
Another directory in the root directory is BOOT, where all tools are concentrated:
encrypt.exe. Run it, and it will prompt you to enter a password. This program will modify password.sys, and then when you start DOS, it will ask you for the previous password. Don't forget it, but if you really forget, run encrypt.exe again under XP and enter a new one.
The other programs under BOOT are very common, so no introduction here.
Directories under BOOT:
There is another BOOT directory under it. Here are some things needed for startup under MSDOS, that is, for autoexec.bat and config.sys startup, such as win32, win98, dwarf's DOS tools, FANX, LAN (only supports my 8139 network card, you need to make some modifications if using other ones. The network card driver can be found in \BOOT\NET\PACKET. There are many source programs in it, and only com or exe files are the drivers to be used. The organization here hasn't been done yet).
CAI directory is TT and WT under DOS, programs for practicing English and Wubi input method. I used them when I was studying, so I collected them here.
cmosmenu directory, tools for modifying and backing up CMOS.
disktool directory, which contains some programs for restoring data and repairing hard drives. The famous DM, Disk Genius, and PQMAGIC (version 7.0, which is a bit old) are also placed here.
drv directory, common DOS drivers, including USB, NTFSPRO, IFS, IEEE1394, and PC card drivers for laptops.
ext directory, some DOS extension programs, including Chinese character systems TW, China Dragon, WPS, as well as program managers seal2, dn, nc, vc, etc.
ghost directory, including version 8.3 and version 11. If you never use version 11, you can delete it.
grub directory, a boot guiding tool. There is a BOOT directory in it. Some IMG files for GRUB startup and GEEXBOX are placed here.
media directory, which includes many multimedia tools, all collected from the Internet. Thanks to the China DOS Union and the New DOS Era website.
net directory, including a large number of tools for accessing the Internet and LAN, as well as executable drivers for network cards under DOS.
That's all for the simple introduction above.
There is a lot of content in this USB flash drive version, so a 512M USB flash drive is required. If you think it's too large, you can remove FANX or GEEXBOX. Delete \BOOT\BOOT\FANX and \BOOT\GRUB\BOOT\GEEXBOX respectively, and then modify the corresponding entries in menu.lst, autoexec.bat, and config.sys in the root directory. Then it can finally be placed in a 256M disk. If you only want to use FANX or GEEXBOX, it's simpler. FANX can be directly started with loadin under DOS and added to autoexec.bat. GEEXBOX is started with grub, and the startup parameters can be referred to in menu.lst in the root directory.
I hope everyone likes this "toy" I made.
Min Cheng'an
June 2007
|
